LM239DTBR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM239DTBR2 Linear - Comparators

The LM239DTBR2 is a type of linear comparator of the Texas Instruments (TI) LM239 family. It is a dual low-power dual-supply low-voltage 14-pin DIP (Dual In-line Package). This type of comparator family is widely known for its excellent linear comparator designs and high performance. It is widely used in applications such as instrumentation, graphic equalization, frequency detection, motion detection and power management.

The LM239DTBR2 linear comparator operates on two separate supplies: Vs (= +24V) and Vcc (= -24V). It is a single-ended output device with a single rail-to-rail output stage. The device\'s signal pins are compatible with 5V logic, making it suitable for a variety of signal inputs from TTL, CMOS and other logic families. The device\'s features allow it to be used in a wide variety of applications.

LM239DTBR2 Application Field

The LM239DTBR2 comparator is often used in systems in which very precise voltage levels must be produced. These could be motion detectors, noise eliminators, frequency detectors and so on. It can be used with signals from 0V to 5V, as well as signals with higher levels such as 12V, 24V and even 48V. It has many uses in audio and video compression and graphic equalization.

One of the most useful application fields for the LM239DTBR2 is in the control of motors or other electrical systems. Because it operates on two separate supplies, it can be used to sense when the voltage that a motor is operating at is outside of the pre-defined boundaries specified by the designer. The LM239DTBR2 therefore has the ability to detect whether a motor has been overloaded, under-powered or allowed to drift due to a lack of regulation.

The LM239DTBR2 can also be used for applications where precise detection and comparison of voltage levels is required. It can be used in servo control systems where the system will latch onto the desired voltage and keep it there. This would be useful for controlling the voltage levels in a radio frequency development and it could be used to control current flow.

LM239DTBR2 Working Principle

The LM239DTBR2 comparator works on the principle of comparing two voltage levels at once. It can compare two voltages that are on two separate supplies so that the voltage levels can be compared directly. The two supplies are Vs and Vcc and these can be used to compare the voltage levels when either or both are above or below the reference voltage. This device allows for the precise comparison of two different voltages in order to detect when either or both are outside of the pre-defined boundaries.

The LM239DTBR2 comparator has two input pins for the signal voltage (V1 and V2). The device has a differential amplifier that amplifies the difference between V1 and V2. The amplified difference signal is then sent to the output stage which produces an output voltage if the difference signal exceeds the reference voltage. The output voltage is 5V if there is a positive difference signal and 0V if there is a negative difference signal.

In order to accurately detect the difference between the two voltage levels, the two voltage levels must be very close together. This is because the device will not detect any difference if the difference between the two voltages is greater than ±15mV.

The LM239DTBR2 comparator is also equipped with a high current output stage which can handle up to 5A of output current. This makes it suitable for applications requiring high current handling, such as motor control and frequency detection.

Conclusion

The LM239DTBR2 linear comparator is a very powerful and versatile converter. It operates on two separate supplies, can compare two voltages, has a differential amplifier, high current output and is suitable for use with 5V logic. It is used in applications such as motor control, frequency detection and graphic equalization. The device\'s ability to detect small differences between two voltage levels makes it a very useful device for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference