MAP5KE7.0CAE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS diodes, also known as Transient Voltage Suppressors, provide protection for your electronic circuitry from Transient or High Speed Voltage pulses. The MAP5KE7.0CAE3 is a Transient Voltage Suppressor diode rated for operation from -7 to 45Volts. It is designed for protection from high energy, high voltage transient events, such as lightning and electrical power line spikes. The MAP5KE7.0CAE3 is capable of sustaining continuous current ratings of up to 7.0 amps, and pulses up to 80 amps.

The MAP5KE7.0CAE3 is typically used for line to ground and line to line transient protection on power entry points or between components on a printed circuit board. It is also used in RF equipment, and power supply line filters that handle high energy transients. It can also be used to protect against Electrostatic Discharge (ESD) events, between key components.

The MAP5KE7.0CAE3 works by diverting high voltage transients away from sensitive components by providing a very low- impedance path. When the voltage exceeds the diode\'s breakdown voltage, the diode conducts and is intended to reduce the peak voltage and its associated effects. It then resumes its non-conductive state until the voltage again exceeds the breakdown voltage. This capability is referred to as clamping.

The MAP5KE7.0CAE3 is very fast in its response time, allowing it to clamp voltage spikes quickly and prevent voltage from entering sensitive areas of the circuit. It also provides a very low forward voltage drop and low capacitance for high frequency transients. It is highly recommended for applications where the voltage is likely to exceed the breakdown voltage of the diode, such as near higher energy sources. It is also ideal for applications where rapid response to transients is needed.

The MAP5KE7.0CAE3 is designed to protect against voltage transients, and is ideal for use in automotive, telecom, telecommunications, and power supply applications. It has become a popular choice for designers because it provides a fast, effective and reliable solution to protect electronic components. The MAP5KE7.0CAE3 is available in SMD and through-hole form factors, and can be easily soldered onto a PCB.

The specific data is subject to PDF, and the above content is for reference