R60100-1COR

Fuseholders are electrical devices used to mount and protect electrical fuses from environmental conditions and other external factors. Fuseholders are used to protect electrical circuits from dangerous levels of current. The R60100-1COR fuseholders are used for less severe electrical applications, where the fuse may be exposed to a high level of moisture or vibrations.

The R60100-1COR fuseholder is designed with a fast-acting connection that react quickly to overloaded signals. The fuseholder is constructed from corrosion-resistant polycarbonate material that is capable of withstanding the high temperatures that are typical of electric circuits. It features two mounting brackets that allow the fuseholder to be quickly installed onto a range of flat and angular surfaces, such as a wall or a panel.

The R60100-1COR fuseholder has four terminals that provide a secure connection to the fuse. The terminals are connected by two metal blocks that are designed to hold up to 10 Amp of current. The terminals are also galvanized for additional corrosion protection. The fuseholder also includes two end caps that are designed to seal the ends of the fuseholder to provide additional protection from moisture, dust, and other contaminants.

The R60100-1COR fuseholder has a built-in thermal protection that prevents the fuseholder from overheating. This protection is designed to shut down the circuit when the temperature exceeds a predetermined temperature. The protection also helps to reduce the buildup of dirt and dust on the fuse holder. The fuseholder also features an over-current protection that limits the amount of current that can flow through the fuseholder.

The R60100-1COR fuseholder is designed to be installed in areas with high current loads. It is capable of handling up to 10 Amps of current, which is adequate for most low-voltage applications. The fuseholder also meets the requirements of UL and CSA standards for safety and quality assurance. Additionally, the fuseholder is designed to be used in a variety of environments, including wet and dry locations.

The R60100-1COR fuseholder is a reliable and cost-effective solution for protecting electrical circuits from dangerous levels of current. It is easy to install and fits securely on most flat and angular surfaces. The thermal protection and over-current protection ensure the safety of the electrical circuit, while the two mounting brackets and the end caps further protect the fuseholder from environmental contaminants.