RN1408,LF(B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bipolar Junction Transistors (BJTs) are three-terminal electronic devices where each terminal is either a base, collector, or emitter. They are available in both single and multi-junction configurations, with various biasing arrangements for enhanced performance. This article will focus on the RN1408 single, pre-biased BJT, which is an all-in-one solution for applications requiring both switching and amplification.

The RN1408 is a NPN transistor with a 900 mA collector current, 70V collector-emitter voltage, and a 3V base-emitter voltage. This versatile device can be used in a variety of applications as it is designed to be pre-biased and provides significant current gain, voltage gain, and power gain. Furthermore, it is completely integrated into a single unit for easy installation in any circuit.

The RN1408 translates an input signal from the base terminal to a larger output signal from the collector, making it ideal for applications requiring amplification and switching. Typically, when the input signal on the base is low (less than 0.6V heater), the device remains in a non-conductive “off” state due to a low collector-emitter voltage. As the voltage on the base rises above 0.6V, the collector-emitter voltage rises and the device begins to conduct. This allows the RN1408 to efficiently transfer lower input signals to provide a larger output signal.

The RN1408 is designed with a pre-biased configuration, which simplifies the engineering process. Pre-biasing allows the device to always remain in an optimized state, without the need for an external biasing voltage. In addition, this type of configuration increases the maximum current and voltage gain of the device, resulting in better performance.

One of the advantages of the RN1408 is its high gain. The voltage gain of the device is expressed as A = Vc/Ve and is typically between 40 and 100. The value of this gain is determined by the current gain of the BJT, which is expressed as h = Ic/Ie and ranges from 50 to 200 for the RN1408. This large gain makes the device suitable for a wide range of applications including audio amplifiers, voltage regulators, and motor controllers.

The RN1408 also offers excellent power output. With a maximum collector current of 900 mA, the device can provide up to 4.5 watts of power while maintaining reliable operation. This level of output is suitable for powering a variety of small motors, motors with a maximum load of 4.5 watts or less, and applications that require a stable output voltage.

The RN1408 BJT is a versatile transistor that can be used in a wide range of applications. Its pre-biased configuration eliminates the need for an external biasing voltage, increasing the speed and accuracy of the device. Furthermore, the device offers high current and voltage gain, as well as excellent power output. This makes the RN1408 ideal for applications requiring amplification, switching, and low-voltage operation.

The specific data is subject to PDF, and the above content is for reference