RN142-0.5-02

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes, such as the RN142-0.5-02, are highly useful components found frequently in a wide variety of electronic systems. This article will discuss the purpose and working principles of this specific model of EMI suppressor.

The most common application field for the RN142-0.5-02 is as a radio-frequency interference (RFI) protector. It is typically placed in-line in a communication system’s circuit to suppress unwanted signals and/or noise from external sources. It works by cutting off the flow of unwanted signals and noise while allowing only the desired signals to pass through. This model of chokes is capable of filtering signals with frequencies ranging up to 3GHz.

The working principle of the RN142-0.5-02 is based on the concept of inductive coupling. Inductive coupling occurs when current flows through a coil, creating an electromagnetic field that is capable of inducing current into a second coil. The induced current, in turn, will flow in a loop around the second coil, thus forming an inductor. The RN142-0.5-02 is an example of an active inductor, meaning that it is designed to perform a specific function within a circuit. In this case, the active inductor acts to reduce the passage of unwanted electromagnetic noise and signals.

The RN142-0.5-02 is also designed to reduce the electromagnetic strength of the circuit in which it is being used. This is accomplished by effectively reducing the current amplitude in the lines, which is achieved by creating an inductive reactance that opposes the movement of the current. The effect is that the current waveform is shifted out-of-phase with the original signal, which in turn reduces the overall energy of the passing signal.

Furthermore, the RN142-0.5-02 has the ability to reduce the inductive loop antenna that is formed between the two conductors that it is installed in. This is helpful because the inductive antenna can act as an unwanted resonance chamber that will amplify and magnify the RFI and noise in the circuit. By using the RN142-0.5-02, the inductive loop antenna is reduced, thereby providing greater protection against external noise and signals.

The RN142-0.5-02 is a highly useful component in a wide variety of circuit designs and configurations. It provides an effective solution to limiting the passage of unwanted RFI and noise in a communication system, while still allowing the desired signals to pass. Furthermore, its ability to reduce the inductive antenna makes it an excellent choice for reducing the overall electromagnetic strength of the circuit in which it is used.

The specific data is subject to PDF, and the above content is for reference