TIP29CG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TIP29CG is a type of single bipolar junction transistor (BJT). It falls under the standard NPN Transistor which is the acronym for negative-positive-negative, meaning that the middle layer or base is a negative layer sandwiched between two positive layers. This type of transistor is a great choice for many circuit designs, as it has an operational voltage range of 40 V, a collector-to-emitter voltage of 30V and a power dissipation of 500mW.

In terms of TIP29CG application fields, the most common ones are amplifier circuits and switching applications. The transistor is well-suited for amplifying small signals for audio applications and for controlling the current flow in circuits which need to switch low-voltage DC devices. It is also suitable for use in low-noise audio amplifiers, LED drivers, motor controllers and RF amplifiers, as well as switching power supplies.

The working principle of TIP29CG is based on the transistor action. It has three layers which are the collector, base and emitter. The collector is the terminal which receives the current from the power supply and transfers it to the other two layers, the base and the emitter. As the current passes through these two layers, it changes in magnitude, thus creating a voltage difference between the base and the emitter.

The base-emitter junction acts as a diode with the vast majority of current flowing from the base to the emitter. This current flow controls the current flow between the collector and the emitter, with the collector-emitter combination acting as an amplifier which can amplify small signals. By controlling the current through the base-emitter junction, the voltage between the collector and the emitter can be adjusted accordingly. The TIP29CG uses a maximum power dissipation rating of 500mW which enables it to be used in high-power applications.

The BJT is traditionally used as an amplifier, however, it can also be used as a switch or transistor rectifier. In switch applications, the transistor is switched ON and OFF quickly, with the ON state representing a hard-short and the OFF state representing an open. This allows the transistor to be used to control devices like LEDs and relays which require fast switching. In rectifier applications, the transistor is switched OFF for more than a millisecond to allow reverse current flow, thus converting AC to DC.

TIP29CG has a great number of applications, from amplifying small signals for audio applications to controlling the currents in power supplies. Its switching applications also make it very versatile and able to control circuits with fast switching speeds. With its wide range of features, TIP29CG is a great choice for many circuit designs.

The specific data is subject to PDF, and the above content is for reference