VIPER-S1

Series:	--
Part Status:	Active
Function:	Transmitter and Receiver, Set
Modulation or Protocol:	--
Frequency:	433.92MHz
Applications:	General Purpose
Interface:	Handheld, 1 Channel
Sensitivity:	--
Power - Output:	10mW
Data Rate (Max):	--
Features:	--
Voltage - Supply:	10 V ~ 30 V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• Introduction

VIPER-S1 is a type of RF receiver, transmitter, and transceiver finished unit designed for a variety of applications. It is designed to accept input signals in the 3.3 to 5 V range and output signals in the 0.9 to 3.6 V range. It is also capable of operating from up to 40 MHz. It has been designed with advanced features, such as the ability to detect interference and signal-to-noise ratios, as well as an adjustable output range. Its features make it suitable for a variety of different applications.

• Applications

The VIPER-S1 is an ideal choice for a variety of different applications. It is often used for broadcast and telecommunications, where it can be used to receive or transmit digital signals. It can also be used for wireless communication between multiple devices, as well as for monitoring and frequency analysis. In addition, it is suitable for remote control applications, where it can be used for signal decoding or transmission of data. It is also well suited for radio astronomy applications, where it can be used to detect and measure astronomical signals.

• Working Principle

The VIPER-S1 works by using its active circuits to convert input signals into a range of frequencies that can be read by the unit. It then amplifies and filters these signals before passing them through a low-noise amplifier. This amplifier ensures that any interference signals present are filtered out. Once the signals have been amplified, they are then passed through a high-performance analog-to-digital converter. This converter converts the analog voltage signals into digital values, which can then be used by the unit to identify and filter out unwanted signals. The unit then uses its digital signal processing algorithms to analyze the data and produce the desired output.It is important to note that the VIPER-S1 is not a transmitter, but rather a receiver. As such, it does not generate any output signals, only input. This means that any modulation or encoding of the data must be done upstream of the unit. Many radio frequency receivers available today can also be used as transmitters, and they are known as transceivers.

• Conclusion

The VIPER-S1 is a type of RF receiver, transmitter, and transceiver finished unit. It is designed to accept input signals in the 3.3 to 5 V range and output signals in the 0.9 to 3.6 V range. It is capable of operating from up to 40 MHz. It features advanced capabilities for detection, interference filtering, and signal-to-noise ratio, making it suitable for a variety of applications, such as broadcast and telecommunications, wireless communication, remote control, and radio astronomy. The VIPER-S1 works by using its active circuits to convert input signals into a range of frequencies before amplifying and filtering them, and then passing them through a low-noise amplifier and an analog-to-digital converter.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description