X5328PZ-2.7A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMICs, or Power Management Integrated Circuits, are sets of components that handle portable electronic equipment power requirements, such as powering and controlling active electronic components in the equipment. The most common type of PMIC is the "supervisor" type, which is designed to monitor for abnormal system conditions and take action when detected. Supervisors can also manage power, providing functions such as adjusting supply voltage and current, power gating, power scaling, and power sequencing.

X5328PZ-2.7A is a low power supervisor IC (supervisory integrated circuit) which specifically designed for low voltage and low power application. It provides system reset, power supply monitor functions and power on reset (POR).

The X5328PZ-2.7A is an integrated circuit with very low power consumption voltage supervisor. It is a tiny package IC with only 3 pins, where the two pins are establishing the power input of the device and the output pin is responsible for the reset signal. It works by monitoring the voltage levels at its pins and turning on its output when it receives an over-voltage signal.

The main application for X5328PZ-2.7A products is for system monitoring and reset management in embedded systems which require very low power requirement. It is highly recommended for portable and battery powered applications. It is useful for providing a signal for reset purposes whenever the input power supply is over or under-voltage.

The working principle behind X5328PZ-2.7A is to monitor the supply voltage Vcc over the chip and turn on the reset signal output whenever Vcc exceeds the threshold value. This particular device can detect the Vcc voltage as low as 0.35V and as high as 4.07V. A higher over or under voltage than the threshold will cause the chip to send out an active low reset signal which is a synchronizing signal that can be used to reset the microcontroller in the system and thus protect the system components. The active low reset signal will then stay active until the voltage falls below 2V for the Over Voltage Reset (OVR) protection, or rises above 0.7V for the Under Voltage Reset (UVR) Protection.

Overall, X5328PZ-2.7A is a useful tool for embedded systems which require the system to be reset in cases of over or under voltage. It is reliable, cost-effective and small in size, making it suitable for various applications. With its low power consumption, it is also suitable for battery powered applications. The exact voltage threshold set for the reset signal can be adjusted easily as needed.

The specific data is subject to PDF, and the above content is for reference