XP0421500L Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The XP0421500L is a Pre-Biased Transistor Array. It is primarily used in power control and signal control applications. It features a control switch that can be used to control the direction of current flow, as well as to selectively activate or deactivate components. This allows for greater flexibility in terms of controlling a circuit’s operating parameters.

The design of this transistor array consists of two NPN transistors, the collector and the base, which are connected in series. A voltage source is connected to the collector and the base generates current, allowing for the control of the base current. The base current is regulated by a built-in series resistor and should remain within a predetermined range for optimum operation. In parallel with the base is a pre-biased resistor, which assists in maintaining the desired series resistance and limits the current that can be passed through the array.

At the source of the XP0421500L is a built-in diode, which is connected in parallel with the emitters of the two transistors, thus providing the ability to control the overall resistance of the array. This diode can be adjusted to regulate the maximum voltage allowed to flow through the array, which can provide protection against over-current or voltage surges. The pre-biased resistor also helps to regulate the total base current, providing greater control over the total operation of the circuit.

The operation of this Pre-Biased Transistor Array can be further enhanced with the addition of additional components. These components can include capacitors and inductors, which help to filter out unwanted signals and to maintain a constant voltage or current. Another common use for the XP0421500L is in the implementation of mobile phones, as this particular transistor array can be used to help control the flow of signals and data.

From a performance standpoint, the XP0421500L can handle a variety of load currents and can operate over a wide range of temperature and current levels. It is designed with rise and fall times that are very low and can easily exceed the devices rated current. The Maximum Collector-Emitter Voltage for this Pre-Biased Transistor Array is about 150V, and the Maximum Collector-Base Voltage is approximately 300V. Additionally, the cut off voltage is between 0.2 and 0.3V.

Obviously, the XP0421500L is a very versatile transistor array and is used in a wide variety of applications. Its multi-function design allows it to be configured in many different ways, depending on the application in question. With careful selection of components and careful circuit design, considerable cost savings can be achieved while providing a reliable and efficient operating solution.

The specific data is subject to PDF, and the above content is for reference