2N6028RLRPG Discrete Semiconductor Products

Series:	--
Part Status:	Obsolete
Voltage:	40V
Power Dissipation (Max):	300mW
Voltage - Output:	11V
Voltage - Offset (Vt):	600mV
Current - Gate to Anode Leakage (Igao):	10nA
Current - Valley (Iv):	25µA
Current - Peak:	150nA
Package / Case:	TO-226-3, TO-92-3 (TO-226AA) (Formed Leads)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BackgroundThe 2N6028RLRPG is a Programmable Unijunction Transistor (PUT) that can be used in a variety of applications. It is a two port device with two terminals (anode and cathode) and a gate. The device can be used to switch between two states, namely on and off. It is a uni-junction semiconductor device and its electrical characteristics are quite similar to that of a conventional junction field-effect transistor (JFET). Developed by Rene Loredog, this PUT can be used for analog and digital applications such as level and amplitude measurement. It can also be used in power control applications and for protection in high voltage circuits. Additionally, it can be used in pulse width and frequency modulation circuits. Working Principle The 2N6028RLRPG PUT works on the principle of uni-polarity. It has two terminals, an anode and a cathode and a gate. When a voltage is applied across the anode and the gate, the device turns on and current flows from the anode to the cathode. If the voltage across the anode and the gate is increased, the current increases until it reaches the avalanche breakdown point. At this point, the current level can not be exceed and the device turns off.When the voltage is decreased, the current will decrease and the device will turn off. The device has a maximum current carrying capacity of 1 A. This provides the flexibility to adjust the current level to meet the application requirement.Applications The 2N6028RLRPG PUT can be used in a wide range of applications including level and amplitude measurement, pulse width and frequency modulation, power control and protection in high voltage circuits. The device is suitable for use in analog and digital applications. It can be used to control the current level or the voltage in switching applications. In protection applications, the device can be used to protect the circuit from damage due to over current or over voltage.The device is also suitable for use in high frequency switching applications. It can provide high efficiency, low power consumption and small size. Additionally, it has a wide operating temperature range from -55°C to +150°C.Conclusion The 2N6028RLRPG Programmable Unijunction Transistor is a two port device with two terminals and a gate. It works on the principle of uni-polarity and can be used to switch between two states. The device can be used in analog and digital applications to control the current or the voltage. Additionally, it can be used in level and amplitude measurement, power control and protection applications. Finally, it has a wide operating temperature range and high efficiency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description