2N6073AG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are a family of semiconductor switches and controllers that have found a wide range of uses in electronic devices. The 2N6073AG is one of the most popular types of these devices. It is a TRIAC with a low stand-off voltage and low on-state resistance, making it ideal for use in mainstream consumer electronics, including computer monitors, power supplies, and household equipment.

A TRIAC is a three-terminal switch developed by General Electric in the 1950s, and the 2N6073AG is the latest generation of this technology. It is a two-transistor AC switch which, after an initial triggering, can be used to control the voltage and current in an AC load. The two transistors in the device are connected to one another via a control gate, and the control gate is usually driven by a control signal from a controller.

The 2N6073AG is designed for use in mains loads that require high power switching, but with a lower current requirement of just 8mA. This makes it suitable for a wide range of consumer electronic devices, ranging from televisions to home appliances. It has a maximized thermal cycling ability, meaning that it can handle up to 65 cycles without failing, providing a longer life span than many other TRIACs.

The working principle of the 2N6073AG is based on the principle of dependent voltage controlled current. This means that the running current of the TRIAC is determined by the voltage applied to its gate. When the gate voltage exceeds a certain threshold level, the TRIAC is triggered and current flows through it until the gate voltage is removed. This allows the 2N6073AG to be used in applications where precise current control is required, such as switching circuits, speed control, and phase control.

In addition to its applications in consumer electronics, the 2N6073AG is also widely used in AC motor control systems. The combination of low on-state resistance and high threshold gate voltage enables precise current control over a wide range of motor speeds. Additionally, it can be used to control the phase angle of AC induction motors, ensuring precise and precise torque control.

The 2N6073AG is a popular TRIAC, largely due to its low cost and ease-of-use. It is a reliable and efficient switch that can be used in a wide range of consumer electronics and industrial applications. This ranges from television to household electronics, as well as motor control systems, providing high levels of current control with a minimal current demand. It can be used for phase and speed control, making it an ideal choice for applications where precise control is required.

The specific data is subject to PDF, and the above content is for reference