2SA1680,T6SCMDF(J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2SA1680,T6SCMDF (J) are NPN single transistors that are widely used for many applications.
They are designed for both high voltage and low voltage applications, and can handle continuous currents from 0.2 to 8.0A.
It is also an excellent general purpose transistor suitable for a variety of applications.

In general, 2SA1680,T6SCMDF (J) has a relatively high maximum collector-emitter voltage rating at 310V. It also has a high current gain rating, which ranges between 70 to 200 volts with a minimum voltage drop of 0.2 volts. As a result, these transistors can also be used in switching applications such as in low noise signal switches.

The main application of 2SA1680,T6SCMDF (J) is as an amplifier. These transistors can be connected either in a common-emitter or common-collector circuit depending on the specific application requirements. Common-emitter circuits are generally used for voltage amplifiers, while the common collector circuits are mostly used for current amplifiers. The 2SA1680,T6SCMDF (J) can also be used as RF amplifier for high-frequency applications.

In addition, 2SA1680,T6SCMDF (J) also can be used as a voltage regulator. These transistors can be connected in a series circuit with a variable resistor to produce a regulating voltage. This can be used for various applications such as voltage limiters, voltage stabilizers, current regulators, and low-dropout regulators.

The working principle of 2SA1680,T6SCMDF (J) is based on the NPN bipolar transistor. This type of transistor has three terminal structures, the base, collector and emitter. When a small base current is supplied, a larger current flow between the collector and emitter terminal, thus allowing current to flow through the circuit. In order to adjust the current flow, a resistor is used between the base and emitter terminal.

2SA1680,T6SCMDF (J) has been designed for both high and low operating voltages, and can handle continuous currents from 0.2 to 8.0A. As a result, these transistors are suitable for a variety of applications including voltage regulators, current amplifiers and switches. 2SA1680,T6SCMDF (J) is an excellent general purpose transistor.

The specific data is subject to PDF, and the above content is for reference