2SD1767T100Q

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A bipolar junction transistor (BJT) is a three terminal device that forms the backbone of many amplifiers, logic circuits, and controllers. The 2SD1767T100Q is a single BJT that is designed for use in a variety of applications. This article will discuss the different application fields and the working principle of the 2SD1767T100Q.

Application Fields

The 2SD1767T100Q is designed for use in both switching and linear modes. The BJT is commonly used in applications such as power switches, audio amplifiers, signal conditioning, and AC motor control. Additionally, the 2SD1767T100Q is also used in voltage regulation, voltage multipliers, and RF amplifiers.

The 2SD1767T100Q is capable of handling currents up to 2000mA continuously, and a maximum power dissipation of 200W. It has a maximum collector voltage of 100V, a maximum emitter voltage of 50V, and a DC current gain (hFE) of 4 to 2000. Additionally, the 2SD1767T100Q has a low noise figure of 2.8dB and a high frequency response range of 100 MHz to 1 GHz.

Working Principle

The 2SD1767T100Q is a three-terminal device consisting of a base, collector, and emitter. When a positive voltage is applied to the base terminal, a current will flow from the emitter to the collector. This current is known as the collector current and is amplified due to the current gain of the BJT.

The collector current is then used to drive a load,such as a light bulb, a motor, or any other type of device. The BJT can be used in either linear or switching applications depending on the type of load it is driving. When used in linear applications, the BJT acts like a variable resistor, allowing the collector current to be adjusted accordingly to control the output voltage. When used in switching applications, the BJT acts as a switch, allowing the collector current to be turned on and off.

In addition to the collector current, the 2SD1767T100Q also has a base current. The base current is required to turn the BJT on and off, in order to control the circuit. The base current is typically small compared to the collector current, making it very efficient in switching applications. Additionally, the 2SD1767T100Q has an extremely low saturation voltage of 0.4V, making it an ideal choice for high speed switching.

Overall, the 2SD1767T100Q is a versatile and reliable BJT. It is capable of handling high currents, high powers, and a wide range of frequencies. Its low saturation voltage makes it ideal for high speed switching applications and its current gain allows it to be used in a variety of linear applications. All of these features make the 2SD1767T100Q an excellent choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference