CEDM7001 TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CEDM7001 TR is a single enhancement-mode MOSFET (Metal-Oxide Semiconductor Field Effect Transistor) designed primarily to provide reliable and efficient operation in in the field of low-to-medium voltage switching applications. As a single variant, the CEDM7001 TR works on the principle of FET (Field Effect Transistor) gate control and can be used as a highly reliable, low power consumption switch in a wide variety of applications.

FETs are a type of transistor in which current flows between two terminals, known as the source and drain, based on the voltage applied to the control gate. These transistors are voltage-controlled and operate in three distinct modes. The three modes, also known as modes of conduction, are the enhancement or depletion mode, the drain-induced or surface field effect, and the active or saturation mode. In the enhancement mode, the voltage is used to increase the channel resistance and thereby limit the flow of current through the channel. Some FETs, such as the CEDM7001 TR, can be employed in either the enhancement or depletion mode to control and switch low to medium voltage supplies.

The CEDM7001 TR works through the control of an electrostatic field at the gate-source junction. A voltage is applied to the gate which, in turn, controls the electric field created at the gate-source junction. This field affects the current flow across the channel between the source and the drain. By varying the voltage of the gate, the current flow through the channel is changed. The CEDM7001 TR is capable of allowing for a wide range of current switching with a relatively low power drain.

For practical purpose, the CEDM7001 TR can be used to control large currents with a low power rating, typically 3V or 5V. It is widely used in various low to medium voltage level applications such as computer power supplies, industrial electronics, SCR controllers, and programmable logic controllers. It is ideal for use in switching applications where a low gate current is required. The CEDM7001 TR is reliable, efficient and versatile that it can be used in a variety of applications.

The MOSFET features an high input impedance that is greater than any other transistor. This enables it to act as a high-frequency amplifier for use in such devices as audio amplifiers, radio transceivers, etc. It is also used in power supplies and switching circuits such as switchmode power supplies. MOSFETs are also found in modern telephones, where they are used to detect tones from the earpiece. The CEDM7001 TR is used in a wide range of applications, making it a highly versatile and useful component.

The low on-state resistance of the CEDM7001 TR enables it to be used as an effective voltage regulator. The drain terminal is used to control the voltage output by controlling the current flowing through the transistor. This is done by supplying a certain amount of drain-to-source current through the channel, which in turn affects the voltage across the drain and source junction. The CEDM7001 TR can also be used in a number of other applications, such as LED dimming, motor control systems, and inductive heating.

The CEDM7001 TR is a highly-flexible and reliable component that provides the versatility and efficiency needed in a wide range of applications. By controlling the gate voltage, the current flow is controlled and the transistor is able to act as an effective switch, voltage regulator, and amplifier. The CEDM7001 TR is suitable for low-to-medium voltage applications and is commonly found in numerous devices, from computer power supplies to industrial electronics.

The specific data is subject to PDF, and the above content is for reference