DDC143ZU-7-F

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Transistor Type:	2 NPN - Pre-Biased (Dual)
Current - Collector (Ic) (Max):	100mA
Voltage - Collector Emitter Breakdown (Max):	50V
Resistor - Base (R1):	4.7 kOhms
Resistor - Emitter Base (R2):	47 kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce:	80 @ 10mA, 5V
Vce Saturation (Max) @ Ib, Ic:	300mV @ 250µA, 5mA
Current - Collector Cutoff (Max):	500nA
Frequency - Transition:	250MHz
Power - Max:	200mW
Mounting Type:	Surface Mount
Package / Case:	6-TSSOP, SC-88, SOT-363
Supplier Device Package:	SOT-363

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DDC143ZU-7-F is a transistor array pre-biased with two built-in resistors. It’s an integrated circuit, which is made up of low power NPN and PNP transistors from metal to silicon semiconductor technology. The integrated circuit chip package is comprised of an NPN transistor connected with an integrated resistor, with two external resistors connected to bias the transistors.The DDC143ZU-7-F is a setting for drive circuits and switching power supplies in consumer electronics. It\'s typically used for triggering relays, motors, solenoid valves, actuators and other similar devices. The integrated circuit is operated with low voltage power supplies like 12V AC or DC and operates at both high and low temperatures. The IC is designed to draw minimal power, making it an efficient choice for battery operated and small volume consumer electronic applications.The integrated circuit has several components and each component will affect the overall performance. These components include NPN transistors, PNP transistors, bipolar junction transistors, resistors and capacitors. All these components have to be connected in a specific way so as to provide the desired operation. The NPN transistor acts as a switch and is used to turn the current flow in the circuit on and off. It is connected to the input voltage source and acts as a semiconductor capable of controlling the current flow. When the input voltage is applied to the NPN transistor, it will create a current flow. The PNP transistor acts as the opposite of the NPN transistor and serves to draw current away from the input voltage source. When the input voltage is applied to the PNP transistor, it will decrease the current flow.The resistors and capacitors act to control the current flow in the circuit. The resistors are used to limit the voltage in the circuit while the capacitors are used to store energy and provide power when needed. The capacitors help to stabilise the circuit and keep it running smooth.Then, the bipolar junction transistor (BJT) is used to create the output. The BJT is connected between the NPN and PNP transistors and is used to amplify the current so that it can be used for applications. When a voltage is applied across the BJT, it will act to control the current flow, like the transistor. The DDC143ZU-7-F package allows for the integrated circuit to be used without the need for any additional components. This makes it a very cost effective solution for use in consumer electronics applications. The integrated circuit can be used in a variety of ways but is typically used to drive relays, motors, solenoid valves and other similar devices. The DDC143ZU-7-F is a cost effective and robust solution for use in consumer electronics applications thanks to its ability to be used without the need of additional components. Its low power consumption makes it an efficient choice compared to other transistor array solutions. With its low power consumption, high reliability and robust design, the DDC143ZU-7-F package is the perfect choice for use in a variety of consumer electronics applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description