DTB114ECT116

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bipolar Junction Transistors, usually referred to as BJTs, are one of the most basic components of electronic devices. One type of BJT is the Single Prebiased Transistor, or DTB114ECT116. This type of transistor is commonly used in a wide range of applications from consumer electronics to military and aerospace applications.

A DTB114ECT116 is often used in low voltage designs, since the transistor can operate with at a maximum of 60 volts. The maximum DC collector current is 3.2 mA, which limits the transistors use to tasks that require low power. At the same time, its power efficiency of 85% means it is capable of more tasks than a more typical transistor.

The most common use of a DTB114ECT116 transistor is in amplifier circuits. As a single pre-biased device, it can produce a signal gain of up to 200. The transistor can be used to boost or reduce the signal at the same time, providing flexibility in design. The relatively low DC collector current, of 3.2 mA, further limits its use to low power applications.

The basic working principle of a DTB114ECT116 is quite simple. A collector lead is connected to a base lead, and when a voltage is applied to the base, current is drawn through the transistor. In a simple amplifier circuit powered by a 9 volt battery, the collector will draw roughly 3.2 mA of current when the base is supplied with 5 volts. The voltage across the collector, when the base is supplied with 5 volts, will be around the same as the nine volt supply. The transistor can operate up to a maximum of 60 volts.

The DTB114ECT116 is also capable of switching small relays, making it suitable for automation and control applications. Its low power DC collector current makes it ideal for applications such as controlling speed in servo motors and HVAC systems. Its power efficiency also means that it can be used to create low voltage power supplies and even for battery backup systems.

DTB114ECT116 transistors can also be used as current sensors. By monitoring the current flow through the transistor, it is possible to monitor and control the voltage. This can be useful in a variety of applications such as portable electronics, where the voltage must be carefully controlled to prevent damage to the device.

In addition to amplifier and control applications, the DTB114ECT116 is also often used for digital logic circuits. By connecting the transistor directly to the logic connections of a chip, the transistor can be used to switch between two logic states. This makes it ideal for use in logic circuits, such as AND and OR gates and flip-flops.

As a single pre-biased transistor, the DTB114ECT116 is an ideal choice for many low voltage applications. It is capable of producing a signal gain of up to 200, and its DC collector current of 3.2 mA means it can be used in low power applications. Its switching capabilities, combined with its low power consumption and good power efficiency, make it a logical choice for many applications. For its small size and low cost, the DTB114ECT116 is truly a versatile transistor.

The specific data is subject to PDF, and the above content is for reference