EGF1AHE3/5CA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EGF1AHE3/5CA is a device belonging to the diodes, rectifiers and single family. A diode is an electronic component with two electrodes which allow current to flow in only one direction, the anode to cathode. Therefore, EGF1AHE3/5CA, when connected in a circuit, has the ability to block current from flowing back in the opposite direction.

This device also acts as a voltage regulator, and is often used in applications that require constant, accurate voltage. When there is a discrepancy between an incoming voltage, and the desired voltage, the device will absorb or release energy as needed to keep the voltage at the desired level.

The major application field of the EGF1AHE3/5CA device is in applications requiring low on-state voltage drop and high reverse voltage blocking capability. For example, it can be used in power supply circuits, DC/DC converters and lighting applications. In each of these applications, the device serves to protect the circuit from high voltage transient spikes, while providing a low voltage drop across the device.

In terms of the device’s operational principle, the EGF1AHE3/5CA acts as a two-terminal wire as long as the voltage applied to the anode is less than the avalanche breakdown voltage. When this voltage is exceeded, the device begins to conduct in the forward direction, and a small voltage drop will be seen across the device. This is due to the fact that voltage on the anode must be greater than the voltage on the cathode for a current to flow. The power dissipation of the device is dependent on the forward current and the forward voltage drop.

In terms of the device’s reverse voltage characteristics, the EGF1AHE3/5CA acts as an open wire when the applied voltage is less than the reverse breakdown voltage. This ensures that current cannot flow in the reverse direction. When the voltage is exceeded, the device will conduct in the reverse direction, resulting in a large reverse current. This can be useful in certain applications where a reverse current is required. The maximum reverse current the device will support is limited by the device’s junction temperature.

To summarize, the EGF1AHE3/5CA is a diode, rectifier and single device which finds its major application field in applications requiring low on-state voltage drop and high reverse voltage blocking capability. In operation, the device acts as a two-terminal wire when operating in the forward direction, and as an open wire when operating in the reverse direction.

The specific data is subject to PDF, and the above content is for reference