FMMT589TC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FMMT589TC is a small, plastic resin, single NPN transistor. It is designed for switching and amplifier applications. The FMMT589TC is typically used in low-power, high-frequency circuits, such as control circuits, audio amplifiers, and radio frequency amplifiers. It is suitable for use in circuits with a power supply voltage range of between 5 and 15V.The FMMT589TC has two bases, an emitter and a collector. The emitter is the positive voltage terminal, and the collector is the negative voltage terminal. The FMMT589TC is a powered by a DC supply, which is usually in the range of 5 to 15V. The base of the transistor is used to control the flow of electrons between the emitter and the collector. The transistor acts as an amplifier when the base is connected to a signal source such as a voltage or a current. When the base voltage is increased or decreased, the flow of electrons between the emitter and the collector increases or decreases, respectively.The FMMT589TC has a maximum current gain (hFE) of 500-500. This means that for every volt increase in the base voltage, the collector current will increase by 500 Volts. The FMMT589TC typically has a maximum collector-to-emitter saturation voltage (Vces) of 0.5V. This means that when the base voltage is increased, the collector current will no longer increase until the voltage between the collector and emitter has reached 0.5V.The FMMT589TC has a maximum power dissipation (Pd) of 900mW. This means that the transistor can handle up to 900mW of power without overloading and damaging the device. The FMMT589TC has a collector-to-base breakdown voltage (Vcb) of 15V. This means that the collector-to-base voltage must never be more than 15V.In conclusion, the FMMT589TC is a single NPN transistor that is typically used in low-power, high-frequency circuits such as audio amplifiers and radio frequency amplifiers. It has a maximum current gain of 500-500, a maximum collector-to-emitter saturation voltage of 0.5V, a maximum power dissipation of 900mW and a collector-to-base breakdown voltage of 15V.

The specific data is subject to PDF, and the above content is for reference