IDT74LVC4245APYG8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IDT74LVC4245APYG8 is a general purpose non-inverting level translator that translates between 1.2V to 3.6V and the 3.3V low voltage integrated circuit logic family. It is a two channel bidirectional level translator, suitable for low voltage logic systems needing to communicate with high voltage logic systems that operate from 1.2V to 3.6V. It has two independent channels, each with two active high enables and is designed for general-purpose level shifting.

The IDT74LVC4245APYG8 has two banks of eight pins. Pins 1, 2, 3, and 4 on each bank are used to select the voltage level to convert to (these are labeled V1, V2, V3, and V4). Pins 5, 6, 7, and 8 are used to select the direction the data flows (these are labeled EN1, EN2, EN3, and EN4). This allows the device to be used in either direction, thus allowing the logic family at either voltage level to be used.

The device is designed to level shift up to four bits of data at a time and uses two enable pins for each channel. The device contains two channels, each channel has two enable pins: EN1 and EN2 for channel A; EN3 and EN4 for channel B. Each enable input must be active high (logic 1) to enable the respective channel. When enable is logic low (0), channel A and channel B are both disabled.

The device can be used as either a non-inverting or an inverting buffer. When used as a non-inverting buffer, the output will be the same as the input. When used as an inverting buffer, the output will be the complementary logic level of the input. The device can be operated in either fast or slow mode, depending on the output rise and fall times required.

The main application field of IDT74LVC4245APYG8 is interfacing between high and low voltage devices. For example, it can be used as an interfacing buffer between an 1.5V microcontroller and a 3V peripheral device. It can also be used to translate between 1.2V and 3.3V logic levels, allowing an older system to communicate with newer components.

The working principle of the IDT74LVC4245APYG8 is quite simple. It depends on the following parameters: the three voltage levels, the direction of the level translator (input/output) and bunch of enable and control pins. To use the device, first specify the voltage levels that the device will convert to and from. Then, specify the direction of the level translator. Finally, enable the correct channels and control the output. All these steps are necessary in order for the device to properly level shift data.

In summary, the IDT74LVC4245APYG8 is a general purpose level translator with two independent channels, each with two active high enables and can be used for level shifting up to four bits of data. Its primary application is for interfacing between components operating at different voltage levels, allowing them to communicate and share data. The device is easy to use and requires only a few parameters to be configured for level shifting.

The specific data is subject to PDF, and the above content is for reference