MPSW92G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MPSW92G is an NPN single transistor with a wide range of applications for amplifying current or switching in digital circuits. It is commonly referred to as a switching transistor because it is capable of handling large amounts of current and switching at high speeds. The device is typically used in applications where a current or voltage is required to be controlled or switched on and off quickly, such as in transistor-based relay circuits. It has a moderate gain of 60 at a collector current of 10mA, and can be used in audio amplifiers, with a maximum frequency of 150KHz.

The MPSW92G is a three-terminal semiconductor device made of a layer of NPN (negative-positive-negative) silicon. The three terminals are the collector, base, and emitter. The collector is the terminal that receives the current to be amplified or switched and the emitter is the terminal where the amplified or switched current is emitted. The base is the controlling terminal, where a small amount of current or voltage is applied to control the larger amount of current flowing between the collector and emitter. The base is highly resistive, allowing it to control the flow of current between the collector and emitter.

To understand the working principle of the MPSW92G, we must start by looking at the biasing of the transistor, which determines whether the transistor is in the on or off state. When the base-emitter voltage is above a certain amount, known as the cutoff voltage, the transistor is in the off state and no current can flow between the collector and emitter. When the base-emitter voltage is below the cutoff voltage, the transistor is in the on state and current can flow between the collector and emitter.

When the transistor is in the on state, the current amplification of the device will be determined by the ratio of the collector current to the base current. The amplification factor, or beta, is the ratio of the collector current to the base current, and is equal to the current gain, or hFE. For the MPSW92G, this is equal to 60 at 10mA. This means that a current of 10mA through the base will result in a collector current of 600mA.

The MPSW92G is a versatile device, capable of being used in a variety of applications, including audio amplifiers, relay circuits, and digital logic switches. In audio amplifiers, the device is used to amplify the signal from an audio source, such as an MP3 player or microphone. In relay circuits, the transistor acts as a switch to turn on and off more powerful external devices, such as electric motors and lights. In digital logic circuits, the device is used to turn on and off specific circuits for certain logic operations.

The MPSW92G is a reliable and cost-effective transistor, used in a wide range of applications. It is a simple, low-cost NPN single transistor with a wide range of applications for amplifying current or switching in digital circuits. It has a moderate gain of 60 at a collector current of 10mA, and can be used in audio amplifiers, with a maximum frequency of 150KHz. It is suitable for use in audio amplifiers, relay circuits, and digital logic switches.

The specific data is subject to PDF, and the above content is for reference