Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MUR8L60HC0G application field and working principle

Introduction

The MUR8L60HC0G is a type of single-phase bridge rectifier installed in a bridge configuration with a TO-220AB package. This rectifier is specially designed to address high-frequency noise in the environment associated with high power switch-mode power supplies. It has a maximum voltage of 600V and a maximum current of 6 A.

Application fields

The MUR8L60HC0G is used in a variety of applications including high-power switch-mode power supplies, low-noise electronic devices, such as DC-DC adapters and chargers, as well as other applications. Additionally, the MUR8L60HC0G is designed to provide efficient operation in higher frequency applications and can resist current up to 6A with a maximum voltage of 600V.

Working principle

The MUR8L60HC0G single-phase bridge rectifier is used to isolate and control the voltage signal into a single-directional AC current. The rectifier consists of four diodes arranged in a bridge configuration – two anodes, and two cathodes. Through the bridge configuration, one of the bridges will always be forward biased, meaning both of the anodes are greater than the cathodes. Therefore, a single-directional current will flow through the circuit.

The voltage and current will also be regulated by a current-limiting resistor in the circuit. This resistor is designed to prevent excessive current flow, while still allowing enough current to power the load. The MUR8L60HC0G is designed to provide efficient operation in high-frequency applications and is capable of handling up to 6A current with a maximum voltage of 600V. In addition, the MUR8L60HC0G is designed to run in a large range of temperatures and is capable of resisting a temperature range of -55℃ to 125℃.

Conclusion

The MUR8L60HC0G is a single-phase bridge rectifier used in a variety of high-power switch-mode power applications. It is tailored to address high-frequency noise in the environment associated with high power supplies and can provide efficient operation in high-frequency applications. It is designed to handle up to 6A current, with a maximum voltage of 600V, and is capable of operating in a wide range of temperatures, from -55℃ to 125℃.

References

[1] “MUR8L60HC0G Datasheet,” Diodes Inc. (August 27th, 2020) Retrieved from https://www.diodes.com/assets/Datasheets/MUR8L60HC0G.pdf.

The specific data is subject to PDF, and the above content is for reference