SST38VF6403B-70I/TV

Series:	SST38
Packaging:	Tray
Part Status:	Active
Memory Type:	Non-Volatile
Memory Format:	FLASH
Technology:	FLASH
Memory Size:	64Mb (4M x 16)
Write Cycle Time - Word, Page:	10µs
Access Time:	70ns
Memory Interface:	Parallel
Voltage - Supply:	2.7 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	48-TFSOP (0.724", 18.40mm Width)
Supplier Device Package:	48-TSOP
Base Part Number:	SST38VF6403

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of SST38VF6403B-70I/TV Memory

SST38VF6403B-70I/TV is a memory device developed by ST Microelectronics. It is an 8-Mbit Serial Flash Memory with 70-ns access times and supports in-system and in-application programming. It is also optimized for MCU and DSP programming for industrial, automotive and consumer applications.

Application of SST38VF6403B-70I/TV Memory

SST38VF6403B-70I/TV is applicable for a wide range of products and applications, such as automotive systems, consumer products, industrial controllers and consumer electronics. For automotive systems, SST38VF6403B-70I/TV plays a vital role in providing reliable, low cost and high performance solutions. This device provides effective solutions such as reliable data storage, low-power processing applications and automotive health monitoring. For consumer products, SST38VF6403B-70I/TV provides fast and efficient storage solutions with its fast access times. This device keeps the device running much faster than standard memory solutions, resulting in improved user experience. It also features data retention rates up to 20 years, making it a reliable and efficient choice. In industrial controllers, the SST38VF6403B-70I/TV provides fast solutions for programming and data storage. It has fast access times and can stores data reliably over long periods of time, making it an ideal choice for industrial automation applications. For consumer electronics, SST38VF6403B-70I/TV offers solutions for a wide range of application, such as digital cameras, gaming devices, digital multimedia players, portable media players and other mobile devices. This device provides efficient storage solutions and fast access times to keep these devices running smoothly and efficiently.

Working Principle of SST38VF6403B-70I/TV Memory

The SST38VF6403B-70I/TV is based on a serial flash architecture. Serial flash technology is a type of Non-Volatile RAM (NVRAM). It uses a single data line to facilitate the transfer of data between the memory device and a microcontroller or other memory device. The device has multiple pins consisting of a serial data pin (SDA), serial clock pin (SCL) and three control pins (CS#, WP#, HOLD#). The SDA pin is used for both data input/output from the device. The SCL pin is used to control the rate of data transfers throughout the device. The chip select (CS#) pin is used to enable and disable the memory device, while the Write Protect (WP#) pin is used to protect the device’s content against unwanted write operations. The HOLD# pin allows the device to be put into a stand-by mode, while keeping all contents of the device intact. The device is organized into 256 sectors of 32 Kbytes each. These sectors can be read, erased and programmed using the appropriate commands. Programming of the device can be done using in-system, in-application and remote programming. The data within the device is protected against unwanted write operations by the use of the Write Protect pin and the use of a write protection command. The device will enter an error state if an attempted write operation is attempted on the device. This can be avoided by enabling the write protection pin or issuing the write protection command before any write operations are attempted.

Conclusion

SST38VF6403B-70I/TV is an 8-Mbit serial flash memory device developed by ST Microelectronics. It provides a wide range of solutions for a multitude of applications such as automotive, consumer, industrial and consumer electronic products. This device features fast access times, reliable data storage, low-power processing and high data retention rates, making it an ideal choice for various applications. The SST38VF6403B-70I/TV is based on serial flash architecture which utilizes a single data line, a serial clock pin and three control pins to facilitate data transfer and operations within the device. Furthermore, the device provides write protection features to prevent any unwanted write operations on its contents.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description