STGP30NC60K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The STGP30NC60K is an Insulated Gate Bipolar Transistor (IGBT), also known as a single. It has several key features that make it versatile and useful in a wide range of applications. This article will focus on the application field and working principle of the STGP30NC60K and what to consider when designing with this component.

The STGP30NC60K is designed for switching applications, providing high current and voltage ratings with low losses. It is suitable for hard switching, such as in motor drive, solar, renewable energy, UPS and more. Other applications include home appliances, industrial motor drives, and automotive power generation. This device operates in either the linear or switch mode and can be used as a rectifier, as well as a half- or full-bridge element.

The STGP30NC60K has an on-state voltage rating of 600 volts and a zero-gate voltage drain-source on-state resistance of 0.13 ohms. It has a temperature range of -55 to +175 degrees Celsius, a low gate trigger current of 50 mA, fast switching speed of 175 nsec, and an overall efficiency of up to 95%. Its isolation voltage is rated for 7.2KV, making it suitable for a wide array of applications.

The STGP30NC60K works on a principle called Electronically Commutated Mode (ECM), which enables the device to switch quickly, with low losses and less noise. In this mode, the device operates as a metal-oxide-semiconductor field-effect transistor (MOSFET). This mode of operation increases the switching speed of the device and reduces switching losses by up to 40%.

Designers must pay attention to static and dynamic losses when using the STGP30NC60K. Static losses are determined by the junction temperature of the device, the thermal impedance of the package, the power dissipation, and the turnaround time of the device. High switching frequencies lead to higher dynamic losses. Care should be taken to keep the dynamic losses to a minimum; otherwise, the device’s efficiency will be compromised. The device should be mounted on a heatsink to manage heat and further reduce losses.

When using the STGP30NC60K, it is important to consider the device’s gate drive circuitry and the selection of the gate resistor and diode. The device requires a proper gate drive voltage and level to switch appropriately. The proper selection of the gate resistor and diode is also essential; they influence the on-state current and turn-off time of the device. The gate resistor must be selected such that it provides enough series resistance to limit the gate current and protect the device against high transient voltages. The diode also helps reduce the switching loss.

The STGP30NC60K has a wide range of applications, including renewable energy, motor drives, solar, home appliances, and more. Its working principle (ECM) is designed to provide low losses and fast switching speed. Designers must pay attention to static and dynamic losses and select the proper gate resistor and diode for their application. With proper care, the STGP30NC60K can provide reliable and cost-effective performance in many switching applications.

The specific data is subject to PDF, and the above content is for reference