STGP35HF60W

An STGP35HF60W is a Type V N-Channel 900V 2.6A 20mΩ IGBT that is part of the STGIP family produced by STMicroelectronics. It is a majority carrier device that can be used as an H-Bridge driver, commutation bridge IGBT or an inverter bridge. It is commonly used in automotive, motor control and motion control applications.

An IGBT is a type of transistor that combines the characteristics of insulated-gate field-effect transistors (IGFETs) with those of bipolar junction transistors (BJTs). It is essentially a combination of a MOSFET and BJT and acts as a voltage-controlled switch. It has low forward voltage drop, high switching speed, high input impedance and high voltage isolation. It is one of the most effective devices for power conversion as it has high efficiency and power density.

The STGP35HF60W is a single IGBT, which means it is a three-terminal device with two power terminals and one control terminal. The two power terminals are the Emitter (E), Collector (C) and the control terminal is the Gate (G).

To turn an IGBT on, a positive potential is applied to the Gate terminal to allow current to flow from the Emitter to the Collector. To turn it off, a negative potential is applied to the gate terminal which will block current from flowing. The amount of power that an IGBT can handle is determined by its maximum collector current, maximum collector-emitter voltage, and its gate-emitter voltage.

The STGP35HF60W has a rated collector current of 2.6A and a maximum collector-emitter voltage of 900V. Its gate-emitter voltage is also rated at +/-20V. It also has a maximum on-state resistance of 20mΩ, an optimum on-state voltage of 1.8V at low temperature and a junction temperature of 175°C. It also has a gate charge of 1.35nC and a fall time of 600ns.

The STGP35HF60W has a wide range of applications and is commonly used in the automotive, motor control and motion control industries. It can be used to drive loads such as motors, solenoids and relays. It can also be used for complex signal processing and switching applications. Additionally, it can be used to build H-bridge circuits for motor control and power conversion. The IGBT is also capable of high-frequency switching and is a popular choice for applications such as motor drives, servo drives, motion control and AC/DC converters.

In summary, the STGP35HF60W is a single IGBT that is commonly used in automotive, motor control and motion control applications. It has a rated collector current of 2.6A and a maximum collector-emitter voltage of 900V. With its low forward voltage drop, high switching speed, high input impedance and high voltage isolation, it is one of the most effective devices for power conversion. It is also capable of high-frequency switching and is used for a variety of applications in the automotive, motor control and motion control industries.