US1J-M3/61T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are components that have a variety of uses depending on their type and application. Single-phase rectifier diodes like the US1J-M3/61T, also known as bridge rectifier diodes, provide rectification of current for the conversion of AC to DC. They are typically used in electrical equipment such as AC-DC power supplies, DC-DC battery chargers, and other equipment where an AC source is converted to DC. This article will provide an overview of the US1J-M3/61T’s application field and working principle.

Application Field

The US1J-M3/61T is typically used in conventional power supplies and any other applications requiring high forward current, low reverse leakage current, and >1000V breakdown voltage. In AC-DC power supplies, it can be used as an uncontrolled rectifier where the output voltage is determined by the load, the input voltage, and the diode’s forward voltage drop. In DC-DC battery chargers, it can be used for rectification, tracking, and current limiting. Other applications may include UPS, upsizing DC motors, and lighting control.

Working Principle

The US1J-M3/61T is a single-phase rectifier diode so it operates on the principle of rectification. Rectification is the conversion of AC current to DC current. The diode structure consists of two terminals, the anode and the cathode. In AC-DC converters, the AC voltage is applied to the terminals with the anode terminal connected to the positive voltage at the peak of the waveform, and the cathode connected to the negative voltage at the lowest point of the waveform. When the positive voltage is applied to the anode side, the diode becomes forward-biased and conducts current. No current is allowed to flow from the anode to the cathode side, and current only flows from the cathode side to the anode side. This allows the diode to rectify AC into DC, resulting in a DC voltage output. In DC-DC converters, the voltage is used to regulate the power flow in order to protect the battery and other components. The diode is used as a switch and is turned on or off depending on the current, which is regulated with a controller.

Conclusion

The US1J-M3/61T is a single-phase rectifier diode suitable for AC-DC and DC-DC converters, as well as other applications requiring high forward current, low reverse leakage current, and >1000V breakdown voltage. It operates on the principle of rectification where the anode and cathode terminals are connected to the positive and negative voltages of the AC voltage, respectively. As a result, the US1J-M3/61T can be used to convert AC to DC or to regulate the power flow in DC-DC converters.

The specific data is subject to PDF, and the above content is for reference