1N3006A

Series:	--
Packaging:	Bulk
Part Status:	Active
Voltage - Zener (Nom) (Vz):	105V
Tolerance:	±5%
Power - Max:	10W
Impedance (Max) (Zzt):	45 Ohms
Current - Reverse Leakage @ Vr:	10µA @ 76V
Voltage - Forward (Vf) (Max) @ If:	1.5V @ 2A
Operating Temperature:	-65°C ~ 175°C
Mounting Type:	Chassis, Stud Mount
Package / Case:	DO-203AA, DO-4, Stud
Supplier Device Package:	DO-213AA
Base Part Number:	1N3006

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1N3006A is a single Zener diode with a variety of applications. It is a low cost, low noise, general purpose, fast recovery rectifier with a high power rating. Zener diodes are used to protect circuits from voltage spikes and overvoltage conditions. They are also used in circuits where fast recovery time is critical to provide the protection required.The 1N3006A is made from a silicon wafer with a p-n junction. It has two terminals; an anode and a cathode. The anode is marked with the letter A, and the cathode is marked with the letter K. The semiconductor junction between these two terminals acts as a diode, blocking current from flowing in either direction. It also acts like a Zener diode, allowing current to flow from the anode to the cathode when the voltage across them exceeds the Zener voltage.The Zener voltage of the 1N3006A is between 11.4 and 11.7 volts. The current rating of the diode is up to 3 amps. The maximum power dissipation at the rated current is 500mW. The diode has a fast forward voltage of 2 volts. It also has a low reverse leakage current of 2 microamps. The maximum operating temperature range is from -55°C to +125°C.The 1N3006A is used in a variety of applications. It is suitable for use in applications such as overvoltage protection, Zener clamping and voltage clamping, general circuit protection, power supply regulation, and additional rectangular signal generation in audio frequency applications.In an overvoltage protection application, the diode is placed in series with the load. When the voltage of the circuit exceeds the Zener voltage, the Zener diode conducts and dissipates the excess voltage in the form of heat. This limits the voltage across the load and protects it from the overvoltage.In a Zener clamping application, the diode is placed in reverse bias between the voltage source and the load. When the voltage across the diode exceeds the Zener voltage, it conducts and clamps the voltage applied to the load. This prevents damage from occurring in the load due to excessive voltage.In a voltage clamping application, the diode is placed in series with the power supply. When the voltage across the power supply exceeds the Zener voltage, the diode conducts and dissipates the excess energy in the form of heat. This protects the power supply from overvoltage and prevents any damage caused by excessive voltage.The 1N3006A is also frequently used in general circuit protection applications. It can be used to throttle, regulate, or even bypass current in cases of voltage surges, current spikes, and overvoltage conditions. This can prevent damage to the circuit components, increase the circuit’s lifespan, and provide additional protection.The 1N3006A is a versatile, cost-effective, and reliable Zener diode. Its wide range of applications make it an ideal choice for a variety of needs, from overvoltage protection to power supply regulation. With a fast recovery time and a lower reverse leakage current, the 1N3006A is perfect for circuits where a reliable and fast recovery diode is essential.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description