1N3042B-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are an integral component in modern electronics, and the Zener Diode is no exception. The 1N3042B-1 is a single Zener diode with a breakdown voltage of 5.1V, making it well suited for applications such as voltage regulation and peak current limiting. It is a low-power device, with a maximum power dissipation of 200mW and a maximum continuous current rating of 300mA.

At its most basic level, the 1N3042B-1 operates as a rectifier diode, allowing current to only flow in a single direction, while blocking the flow of reverse current. This helps to ensure that the device can adequately protect electronic circuits from power surges or voltage spikes.

When the applied voltage reaches the Zener breakdown voltage, designated for the 1N3042B-1 as 5.1V, the device undergoes a process known as \'Zener breakdown\'. This is when the diode starts to allow current to flow in the reverse direction, thus maintaining an equal and opposite voltage with respect to the original applied voltage. This is known as the Zener effect, and it is this effect that enables the Zener diode to act as a voltage regulator.

The 1N3042B-1 may be found in a variety of applications, from dc-to-dc converters to low-dropout voltage regulators (LDOs). With regards to DC-DC converters, the diode can act as both a surge protector, able to withstand transients up to the Zener breakdown voltage, and a current limiter, preventing the current in the circuit from exceeding the device\'s rated current (300mA maximum). Alternatively, the Zener diode could be used as a voltage limiter, limiting the peak voltage at a certain point within the circuit.

Similarly, when used in an LDO, the diode can help to isolate a noisy upstream voltage without greatly affecting the circuit\'s overall current draw or efficiency. This is especially useful when operating devices such as microprocessors with exacting power requirements.

In terms of its physical characteristics, the 1N3042B-1 is offered in a DO-41 (axial) packaging for through-hole assembly, with a variety of other form factors also available. It is built with an aluminium nitrate-silicon carbide junction and because of its low power requirements, it is capable of dissipating heat quickly, even at its rated power level.

In summary, the 1N3042B-1 is a single Zener diode with a breakdown voltage of 5.1V. It is well suited for applications such as voltage regulation and peak current limiting, and it can also be found in a variety of other applications due to its low power dissipation and current ratings, as well as its suitability for use as a surge protector and voltage limiter. Physically, the diode is available in a range of form factors, most notably a through-hole DO-41 assembly.

The specific data is subject to PDF, and the above content is for reference