2N4374

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a type of semi-conductor that controls current information between a power source and a load. Thyristors may be switched on or off with a gate voltage, allowing them to be used as an electronic switch. Because thyristors are relatively inexpensive and do not suffer from wear due to their construction, they are commonly used as an alternative to mechanical switches, relays and fuses. Among the many types of thyristors, Silicon Controlled Rectifiers (SCRs) are among the most important. The 2N4374 is a popular SCR from STMicroelectronics and is used in a variety of applications.

The 2N4374 is a fast turn-on, high-gain SCR configured as a three-terminal normally open triac. It has a 20V continuous blocking voltage, a 3A continuous blocking current and a peak surge blocking current of 20A. The SCR requires a minimum 10mA trigger current to turn it on. The device has a maximum on-state voltage drop of 1v and a maximum off-state voltage of 650 volts.

The 2N4374 is used in a wide range of applications ranging from home appliances, lighting control, and motor control to industrial applications such as heating, power supply, and power factor correction. In applications where reliable switching is required, the 2N4374 SCR is often used as a low resistance switch. It is used in switching power supplies to regulate power to a load, and in applications like dimmers and triacs to control the speed and intensity of lights. It is also used in motor control applications to control the start, speed and direction of motors.

The working principle of an SCR is based on the fact that it can be triggered when a certain amount of current is passed through its gate. When the current through the gate exceeds the specified value, the SCR is activated, allowing current to flow from the anode to the cathode. This switch is referred to as a latching SCR since once it is activated, it will remain in the on state until another gate current is applied in reverse direction.

The 2N4374 is unique in its ability to switch quickly and provide reliable results in a wide range of applications. Its fast turn-on time allows it to quickly respond to changes in current and voltage, while its high blocking voltage and surge current ratings make it suitable for use in high voltage and high current applications. Its small size and low cost make it an attractive choice for consumer, industrial, and commercial applications.

The specific data is subject to PDF, and the above content is for reference