2SB1382

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2SB1382 is a high-voltage switching transistor and it is a member of the bipolar family of transistor. It is a single-transistor type that adopts the NPN structure, and it is a surface mount device with a form factor of TO-254. With an average current gain of 120, this transistor is suitable for applications that require a high output power, high inrush current, and breakdown voltages up to 500V. The collector/base current gain of the 2SB1382 is over 1000 when working at a reverse voltage of 8V and a current of 2mA.

2SB1382 transistors are generally used as a switching device in AC voltage control and motor speed controllers. They can also be used in circuits that require high voltage control such as HV relays, power supplies, regulators, UPS circuits, switching boards and other power control circuits. The 2SB1382 transistors are also used in high-power thyristor drivers and can be used to construct low voltage amplifier circuits.

The working principle of 2SB1382 is based on the amplification of an input signal. It consists of three main layers; the base, the collector and the emitter. The voltage received from the base is amplified and sent to the collector and the emitter. The amplified signal is then used to control a device such as a motor, relay or a thyristor.

When the 2SB1382 is operated in the switching mode, the voltage applied to the base will be amplified and sent to the collector and emitter. This will cause the device to switch on or off according to the voltage applied to the base. When the voltage applied to the base is below the cut-off voltage, the 2SB1382 will remain in the off state, and when the base voltage rises above the cut-off voltage, the 2SB1382 will switch on and allow current to flow from the collector to the emitter.

When the 2SB1382 is operated in the amplifier mode, the input signal will be amplified and sent to the collector and the emitter. This amplified signal will be fed to a load such as an amplifier or speaker. The current gain of the 2SB1382 when operating in this mode depends on the applied voltage, the collector current, and the device temperature. At certain temperatures, the current gain of the 2SB1382 can reach up to 400 or higher.

The 2SB1382 is a versatile transistor that can be used in an array of applications. It can be used in switching applications as well as in amplifier circuits to amplify an input signal. It has a wide range of current and breakdown voltages, making it suitable for a variety of applications. In addition, due to its small form factor, it is easy to mount in compact circuits with limited space.

The specific data is subject to PDF, and the above content is for reference