ATP204-TL-H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ATP204-TL-H is a single MOSFET transistor designed for low-loise and low-power applications. It is a medium power transistor and has a low Idle/Leakage current, making it suitable for a variety of applications. It is available in two package types, SO-18 and TO-8 B-15, and has a drain-source voltage of 30V. It has a sink current of 800mA, a drain current of 4096mA, and a power dissipation of 4W.

The ATP204-TL-H is a voltage driven source follower, meaning the output voltage is in phase and at a slightly reduced magnitude than the voltage fed to its gate. It is commonly used in low impedance source circuits such as analog switching, or in high-side switching applications. Additionally, this transistor can be used as a linear amplifier as long as current peaks are prevented.

The ATP204-TL-H has two operating modes, cut-off and active, depending on the gate voltage applied. In the active state the transistor is turned "on" allowing the drain to source voltage to be equal to the gate voltage. Whenever the gate voltage is below the threshold voltage, the transistor is on "cut-off" mode. In this case the drain-source resistance is very high and no current flows within the device.

The ATP204-TL-H has many advantages over other transistors. For example, its drain-source resistance is very low and it is easily available in two packages. It also has a low input capacitance and a high switching speed. This allows it to be used in a wide variety of applications such as high-side switching and motor control.

Finally, the device has a relatively high current drive capability, or the ability of a device to turn on and off current. This makes it suitable for applications such as power conversion, motor control, and load switching. Additionally, its low voltage operation makes it suitable for use in low-noise, low-power applications.

In conclusion, the ATP204-TL-H is an ideal transistor for those needing an easily available and inexpensive single MOSFET transistor. Its low voltage operation and high current drive capability make it suitable for a variety of applications. Additionally, its low switching speed and low input capacitance allow it to be used in higher speed and power applications such as power conversion, motor control, and load switching.

The specific data is subject to PDF, and the above content is for reference