DCX114TH-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DCX114TH-7 series are pre-biased transistors that can be used in switching and linear applications, such as amplifiers and motor control. These transistors are part of the larger DCX family of products, which includes BJTs, FETs, and hybrid components. DCX114TH-7 is a BJT pre-biased transistor array, meaning that it comes with an integrated power supply, ready for use without adding any external components.

The DCX114TH-7 has two power supply options: a 1.5 V and a 2.5 V supply (with the higher value suitable for higher power applications). The maximum rated collector current is 4 A and the maximum voltage is up to 70 V. These transistors come in several packages, with the TO-220, DIP8, and DSPN9 being the most common.

DCX114TH-7 transistors have a variety of uses in a range of applications. They are often used in amplifiers and audio circuits, as the pre-biased BJT provides excellent high-frequency performance. They are also used in motor control applications and as logic drivers since their low collector-emitter saturation voltage (Vcesat) results in minimal dropout voltage and thus improved performance.

The working principle of a pre-biased BJT is a combination of two stages. The first stage is the bias stage, where the base-emitter junction is forward-biased by applying a forward bias voltage. This causes a base current to flow which increases exponentially with the applied voltage. When enough current flows through the base-emitter junction, it in turn forward-biases the collector-base junction and this is amplified by current gain, increasing the output current. The second stage is the operation stage where the voltage applied to the collector is the output voltage, which is proportional to the input voltage.

The DCX114TH-7 series have a few advantages over other fabrication techniques used in transistors. The pre-biased configuration provides improved response time, as there is no need for additional components for switching and linear applications. Additionally, the use of TO-220 packages and DIP/DSPN9 packages allow for better thermal management, as the integrated power supply allows for better heat dissipation, allowing for improved performance and reliability.

Due to its high performance, wide selection of packages and ease of use, the DCX114TH-7 series of pre-biased transistors is an ideal choice for a wide range of applications. From amplifiers, motor control, to logic drivers, these transistors will provide the performance and reliability necessary to ensure optimal operation.

The specific data is subject to PDF, and the above content is for reference