DCX144EK-7-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DCX144EK-7-F is a component from the Transistors - Bipolar (BJT) - Arrays, Pre-Biased series. It is an integrated circuit device consisting of six Darlington transistors, with pre-biased base to source connections, and is typically used in automotive, industrial and consumer applications. This versatile component can be used for high power switching, voltage regulator, amplifier, and low noise audio applications.

The DCX144EK-7-F has a power rating of 750 mW, a maximum collector to base leakage current of 0.2 mA and a forward current gain of 1000. Its breakdown voltage is typically 28 V, and it works best in the temperature range of -40 to +150 degrees Celsius. The DCX144EK-7-F has a physical dimension of 10.9 mm x 9.7 mm x 1.5 mm and it is available in through-hole, surface mount and dual in-line packages.

This device has a pre-biased base to source connection, which means that the base current can be easily enhanced by simply providing sufficient base voltage. This reduces the need to use external resistors to maintain the base current. In addition, the DCX144EK-7-F is designed to provide reliable operation and good long-term stability. It is also suitable for a wide range of operating conditions.

The working principle of the DCX144EK-7-F is based on the Darlington transistor configuration. This configuration consists of two transistors connected in series, with the output of the first transistor connected to the base of the second. The base current of the first transistor is amplified by the larger current gain of the second transistor. This results in a much higher amplification factor than a single transistor, allowing for more efficient power output with less power loss.

The device is also capable of producing high speed switching operations. Switching speeds up to 50 MHz are possible using the DCX144EK-7-F, which makes it suitable for digital or analog switching applications. It has a common emitter configuration and provides full input to output isolation. It is designed to provide an enhanced high speed switching rate and low power dissipation.

The DCX144EK-7-F also has an integrated thermal protection feature. This feature helps prevent the device from overheating and provides stability to its operation. The device also has a high off-state leakage current, which helps increase the safety and life of the circuit.

The DCX144EK-7-F is a versatile and reliable component suitable for a wide range of applications. Its pre-bias line allows for quick and easy base current amplification, while its high speed switching and low power dissipation makes it ideal for digital and analog switching applications. Its integrated thermal protection feature provides stability to its operation, and its high off-state leakage current ensures a longer operational life. With all these features, the DCX144EK-7-F is an excellent choice for automotive, industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference