DDA114EU-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A DDA114EU-7 is a type of transistor array that can be used to amplify electrical signals or switch electrical loads. It is a pre-biased, low on-resistance array and is composed of four PNP transistors.

The purpose of a pre-biased transistor array is to reduce the amount of current required to turn the transistor on or off. This makes it useful for applications that require high current switching capabilities while minimizing power consumption. Transistor arrays are commonly used in inverters, amplifiers, and other devices that require fast switching or high current outputs.

The key feature of the DDA114EU-7 is its low on-resistance, which is achieved by using the latest technology in wafer thinning, dual-chip packaging, and process integration. This provides a high level of noise immunity and reduces power consumption. It also helps to reduce the heat generated by the transistors, thus avoiding any possibility of thermal runaway.

The DDA114EU-7 has two distinct operating modes: pre-bias and non-pre-bias. The pre-bias mode is used when the application requires output switching and higher current levels. In this mode, the current is applied to the transistor\'s gate before the voltage is applied to the drain. This allows the transistor to turn on more quickly and with a lower voltage level. The non-pre-bias mode is used when the application requires higher voltage levels and the output requires minimal switching.

The DDA114EU-7 also has a thermal protection feature that shuts off the device if the maximum temperature limit is exceeded. This helps to protect the device from overheating, which can lead to permanent damage or malfunction.

At the heart of the DDA114EU-7 is four NPN transistors, each with a collector-emitter voltage rating of 60V. These transistors are then connected together in the following configuration: two transistors are connected in a common-emitter configuration, one in a common-base configuration, and one in a common-collector configuration. The common-emitter transistors are used to provide the pre-bias current that turns the device on, while the other two transistors are used to help regulate the output current.

Overall, the DDA114EU-7 has a wide range of applications, from high-current switching to precision signal amplification. Its low on-resistance and thermal protection features make it an ideal choice for applications that require minimal power consumption, fast switching speeds, and minimal heat generation.

The specific data is subject to PDF, and the above content is for reference