DTC123ECAHZGT116

Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Transistor Type:	NPN - Pre-Biased + Diode
Current - Collector (Ic) (Max):	100mA
Resistor - Base (R1):	2.2 kOhms
Resistor - Emitter Base (R2):	2.2 kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce:	20 @ 20mA, 5V
Vce Saturation (Max) @ Ib, Ic:	300mV @ 500µA, 10mA
Current - Collector Cutoff (Max):	--
Frequency - Transition:	250MHz
Power - Max:	350mW
Mounting Type:	Surface Mount
Package / Case:	TO-236-3, SC-59, SOT-23-3
Supplier Device Package:	SST3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The DTC123ECAHZGT116 is a type of bipolar transistor, specifically single, pre-biased. It is a highly efficient transistor with advanced features, and is highly suited to a variety of applications. This article examines the application field and working principle of the DTC123ECAHZGT116.

Applications Of The DTC123ECAHZGT116

The DTC123ECAHZGT116 is typically used in a variety of low power applications which require precise control of voltage and current. It is highly efficient, and highly suitable for use in the following settings;

• Sensor applications
• Robotics systems
• Analog circuitry
• Amplifier circuits
• Actuators
• Power supply circuits

The DTC123ECAHZGT116 is also suitable for use in all general purpose applications, where current and voltage control is required. It is also highly recommended for use in the automotive, aerospace and security industries, where accurate and reliable control is essential.

Working Principle Of The DTC123ECAHZGT116

The DTC123ECAHZGT116 is a single, pre-biased bipolar transistor. As with all bipolar transistors, it is composed of three terminals; a base, an emitter and a collector.The base terminal is used to control the flow of current, and can be connected directly to the emitter or collector depending on the application. The emitter is the negative terminal, and the collector is the positive terminal.When the base terminal is connected to the emitter, current will flow from the emitter to the collector; this is known as the forward current gain (BJT). When the base terminal is connected to the collector, current will flow from the collector to the emitter, and this is known as the reverse current gain (BJT).The DTC123ECAHZGT116 is pre-biased, which means that current will flow through the transistor without the use of any external bias control. This makes the DTC123ECAHZGT116 ideal for use in applications where fast switching and precise control is required.

Conclusion

The DTC123ECAHZGT116 is a highly efficient single, pre-biased bipolar transistor, which is well suited to a variety of applications. It is capable of fast and precise control, and is recommended for use in sensor, robotics, analog, amplifier and actuator circuits, as well as general purpose applications. The working principle of the DTC123ECAHZGT116 is based on the forward and reverse current gain, and it is pre-biased to allow fast and accurate control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description