DTC143XMT2L

Resistor - Emitter Base (R2):	10 kOhms
Base Part Number:	DTC143
Supplier Device Package:	VMT3
Package / Case:	SOT-723
Mounting Type:	Surface Mount
Power - Max:	150mW
Frequency - Transition:	250MHz
Current - Collector Cutoff (Max):	500nA
Vce Saturation (Max) @ Ib, Ic:	300mV @ 500µA, 10mA
DC Current Gain (hFE) (Min) @ Ic, Vce:	30 @ 10mA, 5V
Series:	--
Resistor - Base (R1):	4.7 kOhms
Voltage - Collector Emitter Breakdown (Max):	50V
Current - Collector (Ic) (Max):	100mA
Transistor Type:	NPN - Pre-Biased
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DTC143XMT2L is a pre-biased, single-transistor transistor, also known as a bipolar junction transistor (BJT). It is a small-signal, high-speed, high-performance transistor that is used in a variety of applications, from amplifying low-level signals to switching high-power loads.The device is constructed of a small n-type semiconductor base, an n-type layer, and a collector and emitter made of either a p-type or n-type semiconductor material. The base is attached to the emitter, and the emitter is connected to the collector. The base is then forward biased and the collector is reverse biased. The base-collector junction is called the transistor action region.The transistor will function by allowing a current to flow from the base to the collector, or from the collector to the base. The current causes electrons to move from the base to the collector or from the collector to the base. As the current moves, it creates a voltage across the transistor action region. The greater the voltage, the greater the current moving through the transistor, which is used to control higher-powered devices.One of the most common uses of the DTC143XMT2L is in amplifiers. These amplifiers use the transistor to both increase the output current and voltage of the signal. The signal is input into the transistor and the output is amplified by the current and voltage gain of the transistor.Additionally, the DTC143XMT2L can be used in switching circuits to control the flow of currents and voltages. The transistor can be used to either switch or amplify the signal, depending on the configuration of the circuit. The switching application relies on the transistor to turn certain paths in either direction on or off to control the level of current or voltage that is flowing in the circuit.The DTC143XMT2L provides an excellent solution for those who need a small-signal, high-performance, high-speed transistor. It is a suitable device for applications where current and voltage gain are needed, in addition to switching applications. It is reliable and easy to use, making it an ideal choice for use in many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description