LM5110-1M/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM5110-1M/NOPB is a gate driver integrated circuit (IC) for advanced power management. It is a monolithic, low-voltage half-bridge gate driver designed for automotive powertrain applications such as DC/DC converters, motors and loads. The device has two independent circuits, each capable of driving two N-channel MOSFETs or two equivalent power devices from a single 5 V supply. The module deals with high current and power switching design requirements without the use of an external low-side MOSFET driver and can drive external loads up to 12 A. The device is fully protected against over-current and over-temperature fault conditions. Furthermore, under-voltage lockout (UVLO) protection is provided to ensure safe operation of the device.

The LM5110-1M/NOPB is classified as a Power Management Integrated Circuit (PMIC) and is mainly used as a Gate Driver. A gate driver is a power semiconductor device used to drive a high side or low side power switch in an power supply design. A gate driver performs two main functions; first, it provides sufficient gate drive to ensure that the power switch turns on and off properly and second, it provides isolation between the control signal (from a controller) and the power switch. The LM5110-1M/NOPB gate driver provides both these needed functions.

The gate driver IC is designed to drive wide range of power switches and other power devices from a single 5 V supply. The gate driver IC is protected against over-currents, over-temperatures, and UVLO conditions. The device also has integrated thermal protection, establishing a thermal limit for the gate driver IC by sensing the junction temperature of the IC. The device also features integrated fault detect and logic enable pins, which when asserted, give a fault signal to the system controller.

The LM5110-1M/NOPB gate driver is capable of driving single, dual and three phase, low-side and high-side N-Channel MOSFET power switches, along with other power devices such as IGBTs, SiCs, MOSFETs, or any other specialized power switch. The device provides a slew rate control which can be set to provide a soft turn on and off of the power switch, thus minimizing audible noise due to the switching. The device also features a built-in loop compensation, which shortens the time required to stabilize the current loop, and an integrated gate pull-down circuit which provides a low impedance path to ground when the device is disabled.

In addition, the device includes a startup circuit which increases the voltage at the gate of the power switch to allow faster turn-on. The startup circuit has under-voltage lockout protection which prevents the device from turning on when the power supply voltage is too low. The device also provides an enable pin, which when asserted will turn-on the internal switch and allow for current to flow between the power switch and the load.

Overall, the LM5110-1M/NOPB Gate Driver IC is a perfect companion for any power switch in any power supply design. Its comprehensive feature set ensures efficient, reliable, and safe operation for any of the application for which it is designed. It has the ability to operate at high temperatures in extreme environments and its built-in safety features make it well suited for any harsh and demanding application.

The specific data is subject to PDF, and the above content is for reference