MT29F8G16ABACAH4:C

Series:	--
Packaging:	Tray
Part Status:	Obsolete
Memory Type:	Non-Volatile
Memory Format:	FLASH
Technology:	FLASH - NAND
Memory Size:	8Gb (512M x 16)
Write Cycle Time - Word, Page:	--
Memory Interface:	Parallel
Voltage - Supply:	2.7 V ~ 3.6 V
Operating Temperature:	0°C ~ 70°C (TA)
Mounting Type:	Surface Mount
Package / Case:	63-VFBGA
Supplier Device Package:	63-VFBGA (9x11)
Base Part Number:	MT29F8G16

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MT29F8G16ABACAH4:C

MT29F8G16ABACAH4:C is a type of flash memory chip manufactured by Micron Technologies. It is an 8 largest and 45nm technology that features a high-density, multi-level cell (MLC) design that is ideal for embedded systems and other industrial applications. The MT29F8G16ABACAH4:C offers superior random and sustained read/writes performance and improved power management. It is a part of Micron\'s 28nm NAND flash memory architecture family, which offers low power consumption and higher performance than other NAND architectures.

Memory Classification

Memory can be generally classified based on its speed and access type. Random Access Memory (RAM) and Read-Only Memory (ROM) are two of the most common types of memory.

• Random Access Memory (RAM): RAM is a type of memory that allows for fast reading and writing of data. RAM is a volatile type of memory, meaning that it will lose all its contents when power is lost. Generally, Random Access Memory is used as the main memory of a computer, where data and programs are stored while they are being used.
• Read-Only Memory (ROM): ROM is a type of memory that can only be read, not written or changed. ROM is a non-volatile type of memory, meaning it does not require power to retain the data stored in it. Generally, ROM is used for storing data that needs to be retained unchanged over many computer restarts, such as the firmware of a computer’s BIOS.

Flash memory is another type of memory, which is also non-volatile and is commonly used in consumer electronics such as USB drives and digital cameras.

MT29F8G16ABACAH4:C Application Field and Working Principle

MT29F8G16ABACAH4:C is the latest in Micron\'s 28nm NAND architecture that provides improved performance and lower power consumption. This flash memory is ideal for embedded systems, industrial applications, consumer electronics, and many other applications that require high performance and low power consumption.The MT29F8G16ABACAH4:C is built on an 8 largest, 45nm lithography process with a high-density, multi-level cell (MLC) design. It is capable of random and sustained read/writes performance and improved power management.The MT29F8G16ABACAH4:C is based on 4KB pages with 16KB page map blocks. The chip is organized into page map blocks that are composed of 256 pages. Typically the chip is organized into 4KB pages with 32KB page map blocks used for general-purpose files that allow for higher write performance. The chip is also organized into 64KB blocks for enhanced data block erasing.The MT29F8G16ABACAH4:C features a partial page program size of 4KB, as well as an internal ECC engine supporting a 6-bit/1K page size. The read/write operations are typically performed in half-page time cycles of 24 μs/page. The MT29F8G16ABACAH4:C also features an invalid block management scheme that enables the efficient utilization of device capacity. This scheme utilizes a cyclic mapping technique to relocate invalid blocks so that device capacity can be utilized efficiently. MT29F8G16ABACAH4:C is a type of Flash-NOR memory, meaning it combines the fast access times of RAM with the persistence of ROM. By utilizing the NAND architectural design, the chip is capable of faster random access times than traditional NOR Flash. The MT29F8G16ABACAH4:C is optimized for embedded applications and offers the possibility of increased yield and a smaller die size than traditional NOR Flash memory.

Conclusion

The MT29F8G16ABACAH4:C is an 8 largest, 45nm technology from Micron’s NAND Flash Architecture family. It is a high-density, multi-level cell (MLC) type of Flash-NOR memory that features a partial page program size of 4KB and and 6-bit/1K page size. The chip is optimized for embedded systems and industrial applications, offering increased performance and power efficiency. Moreover, the MT29F8G16ABACAH4:C features an invalid block management scheme which enables efficient utilization of the device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description