NGTD5R65F2SWK

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	650V
Current - Average Rectified (Io):	--
Voltage - Forward (Vf) (Max) @ If:	1.3V @ 20A
Speed:	--
Current - Reverse Leakage @ Vr:	1µA @ 650V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	Die
Supplier Device Package:	Die
Operating Temperature - Junction:	175°C (Max)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the NGTD5R65F2SWK

The NGTD5R65F2SWK is a diode in the rectifier range, specifically a single rectifier. A rectifier is an electrical device which converts alternating current (AC) to direct current (DC). The NGTD5R65F2SWK is a bridge rectifier with a nominal peak reverse voltage of 5 volts, a current rating of 65 A, and a forward voltage drop of 2 volts. It is a widely used device and has many applications, including power supply circuits, heating elements, and DC motor control.

Application Field of the NGTD5R65F2SWK

The NGTD5R65F2SWK is a useful device for many applications. It can be used in power supplies as it can provide a DC output voltage from an AC input voltage. In combination with a transformer or a regulator, it can be used to create even higher voltage levels. It is also used in heating elements where it provides the large current for the high-power heating elements. It is also used in DC motor control, as the high current can handle the power demands of the motor circuit.

It is also suitable for applications such as solar batteries, photovoltaic cells, inverters, power converters, and DC pulse generators. It has excellent thermal characteristics and can handle up to 5.6 W of power. It is also suitable for current limiting applications due to its low forward voltage drop of 2 volts.

The Working Principle of the NGTD5R65F2SWK

The NGTD5R65F2SWK works on the principle of a bridge rectifier. This is a type of diode array consisting of four diodes connected in a bridge configuration. The four diodes are: an anode, a cathode, an anode-gate, and a cathode-gate. It works by allowing the current to flow in one direction only and blocks the current in the opposite direction.

When an alternating current is applied to the anode and the cathode, the current will divide between the two diodes. When the current is higher than the reverse breakover voltage, the anode-gate and the cathode-gate connected in reverse polarity will open and allow the current to pass. When the current drops below the voltage, the diodes will close. This way, the NGTD5R65F2SWK will convert the AC to DC.

The NGTD5R65F2SWK can also be used as a rectifying element or a switch in combination with a voltage-controlled device. The NGTD5R65F2SWK has an adjustable break over voltage meaning that the device can be set to switch on and off at different voltage levels, depending on the application. With proper application, it can provide more precise control over the output voltage as compared to other rectifiers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description