NGTD9R120F2SWK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are the most widely used type of semiconductor device currently. They are used in a variety of applications ranging from simple rectifier circuits to high speed switching. This article focuses on the application field and working principle of the NGTD9R120F2SWK, a single rectifier diode.

A single rectifier diode is a two-terminal semiconductor device that can conduct current in one direction, while blocking current in the opposite direction. It is widely used in applications such as power supplies, battery chargers, motor drives, audio circuits and RF circuits. The device has a reliable breakdown voltage and power dissipation rating, making it suitable for a variety of applications.

The NGTD9R120F2SWK is a single rectifier diode with a maximum forward voltage of 650V and a maximum repetitive peak reverse voltage of 1200V. It has a maximum forward current of 3A and a maximum non-repetitive surge peak forward current of 12A. The device is constructed from a silicon chip and a plastic resin package, allowing it to operate reliably in temperatures ranging from -55°C to +150°C.

The principle of operation of a rectifier diode is based on its rectifying or rectification ability. When forward-biased, the device will allow current to pass through it in one direction, while blocking it in the opposite direction. When reverse-biased, the device will act as an insulator, blocking nearly all current from flowing.

For a single rectifier diode, the forward voltage drop is typically between 0.6 V to 1.2 V depending on the current. When reverse-biased, a small leakage current of a few microamperes may flow dependent on the electric field strength in the device.

In power applications, the NGTD9R120F2SWK is mainly used for rectifying AC power. It can be connected in series or parallel across the AC mains to provide a DC supply voltage. This is done by applying a direct current (DC) bias to the device in one direction at a specific voltage. As the AC voltage across the diode changes in magnitude and polarity, the device will allow current to pass through in one direction and block current in the other direction. This effectively converts the AC input to a corresponding DC output.

In switching applications, the NGTD9R120F2SWK can be used as either a blocking diode or a freewheeling diode. When used as a blocking diode, it can be connected in series with a load across the transistor switch to protect it from any reverse current. When used as a freewheeling diode, it can be connected in parallel with a load across the transistor switch to provide a low impedance path for any reverse current. This helps to reduce the reverse current flow through the transistor switch and prevents it from overheating.

In conclusion, the NGTD9R120F2SWK is a single rectifier diode that is suitable for a wide range of power and switching applications. Its rectifying property allows it to convert an AC input to a DC output, while its low forward voltage drop and small leakage current make it ideal for high frequency switching circuits.

The specific data is subject to PDF, and the above content is for reference