RN116-0.5-02-39M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are electronic components designed to reduce the amount of noise radiating from a power supply or amplifier. They are also used in the power backplane and switch PSU to dissipate and absorb high frequencies that may be harmful to the sensitive components.

The RN116-0.5-02-39M is a common mode choke which is specifically designed to reduce the noise that is generated from a power supply or amplifier. It is also used in the power backplane and switch PSU to dissipate and absorb high frequencies that may be harmful to the sensitive components.

This device utilizes two small coils of insulated copper windings which are wound together on the same bobbin. Each winding is connected in parallel at one end and in series at the other end, forming a "saddle" configuration. This configuration is used to transfer the distortion of the signal across the coils and effectively reduce the noise.

The RN116-0.5-02-39M is commonly used in electrical applications such as automotive, power supplies, consumer electronics, and audio and video equipment. It can be used to reduce the amount of electrical noise that is generated by a power supply or amplifier that can cause interference in nearby equipment. This type of device is also used in the power backplane and switch PSU to reduce the amount of high frequency noise that may be harmful to sensitive components.

This particular device is a 0.5 ohm choke with a total DC resistance of 2.4 ohms and a maximum current rating of 39A. This device is capable of dissipating four times its rated current, and the insulation is rated for up to 300 volts. The device is capable of passing up to 20kHz of line frequency.

The RN116-0.5-02-39M is typically used to reduce electrical noise in power supplies, amplifiers, and other devices that generate or induce noise. It is designed to provide high levels of noise reduction, and can be used in a wide variety of applications.

In conclusion, the RN116-0.5-02-39M is a common mode choke designed to reduce noise from power supplies or amplifiers. It is capable of dissipating four times its rated current and has a maximum current rating of 39A. This device is commonly used in electrical applications such as automotive, power supplies, consumer electronics, and audio and video equipment to reduce electrical noise. It is also used in the power backplane and switch PSU to reduce the amount of high frequency noise that may be harmful to sensitive components.

The specific data is subject to PDF, and the above content is for reference