STF4N62K3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

STF4N62K3 is a general-purpose, enhancement-mode (normally-off) metal-oxide-semiconductor field-effect transistor (MOSFET). It is designed to have good switching performance combined with low on-state resistance. It is commonly used in a wide range of applications, from low frequency switching to the high frequency switching.

The STF4N62K3 is composed of a monolithic chip containing an array of vertical N-channel MOSFETs. These transistors have a gate-source voltage rating of -20V to +20V and a maximum drain current rating of 3 amperes. They have a breakdown voltage rating of -40V to +40V. The STF4N62K3 has a very fast switching speed and a low on-resistance of 0.45Ω.

The basic principle of operation of the STF4N62K3 is the same as any other enhancement-mode MOSFET. When the voltage applied to the gate is below the threshold voltage, the channel between the drain and source is completely pinched off and no current flows through the transistor. When the gate voltage exceeds the threshold voltage, the channel between the drain and source opens, allowing current to flow through the transistor. The current through the transistor increases exponentially with the increase in the gate voltage.

The STF4N62K3 can be used for a variety of applications, from digital logic circuit to motor control and switch mode power supplies. In digital logic circuit, it can be used as a switch, controlling the flow of electricity from one point to another. It can also be used in switch-mode power supplies, used to convert voltage from one level to another or to control the current in the power supply. In motor control, it can be used as a speed controller, controlling the speed of a motor by controlling the amount of current flowing through it.

The most common application of the STF4N62K3 is in power amp circuits, where it is used to amplify the output power of an audio signal. In this application, the STF4N62K3 is used as the final stage of amplification, where the amplified signal is then fed to the speakers. It is also used in switching circuits, such as pulse-width modulation (PWM) circuits, where it is used to control the on-time and off-time of a device to control its speed or other parameters.

The STF4N62K3 can also be used in other areas like dc-dc converters, voltage regulators, phase-control circuits, triac circuits, and solenoid drivers, where they are used to control and regulate the flow of electricity in different circuits. In short, the STF4N62K3 is a very versatile device, suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference