UC2715DTRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UC2715DTRG4 is a high-performance, high-efficiency gate driver from Texas Instruments. This device offers the industry\'s highest peak output current of 10 A in a single package. It also offers a higher current-carrying capability with less power and better transient performance, more robust gate voltage, fewer drive losses and higher efficiency.

The UC2715DTRG4 is designed for use in a wide range of applications, such as in power-supplies, DC-DC converters, motor control systems, automotive lighting, etc. It is also suitable for digital and analog input circuitry, as well as powering logic.

UC2715DTRG4 Application Field

The UC2715DTRG4 is well-suited for applications requiring high-speed, high-efficiency drive of gate capacitances. It has been designed to provide superior driving performance for ultra-low on-resistance MOSFETs, IGBTs and GTOs, as well as high-speed logic loads. It also has significant advantages in switching critical timing circuits, such as Zener diodes, IGBTs, and Hall-effect sensors.

The device can be used for motor control applications such as DC brushless motor drives (BLDC), AC induction motor drives (IMD) and brushless DC motor drives (BLDC). It is well-suited for driving actuators in household appliances, such as washing machines and air conditioners, as well as automotive lighting, audio systems and LCD backlighting.

The UC2715DTRG4 also has excellent differential drive capability, allowing it to be used in a wide variety of dual-channel and half-bridge applications. It is also suitable for applications requiring high-speed switching of solenoid or relay coils, or the driving of IGBTs, GTOs and MOSFETs in VSC (voltage source converters). Its capabilities make it suitable for other applications such as LCD power supplies, battery controls and active power line filters, as well as DC motor drives.

UC2715DTRG4 Working Principle

The UC2715DTRG4 works by providing a two-level drive signal to the gate of a power MOSFET, IGBT or GTO. This two-level signal enables faster currents to be switched in and out of the power device and allows for faster switching speeds with less power dissipated in the device itself.

The device has two inputs – a logic level input (Vin) and a driver input (Vgs). The logic level input (Vin) is used to provide an enable signal to the gate driver output and can be driven by any 3.3V or 5V CMOS digital signal. The driver input is used to provide the power device with a drive signal and is typically driven by a high-current waveform.

The output waveform of the gate driver is determined by a combination of the Vin and Vgs inputs. The gate driver output is configured to switch the gate of the power device with a minimum on-time of 8ns and a maximum on-time of 60us. This allows the device to operate quickly and efficiently at higher frequencies.

The UC2715DTRG4 is designed for use in many applications and provides a cost-effective solution for powering logic and providing drive signals for switching power devices. With its high peak output current and low power consumption, it is well-suited for a variety of applications, including motor control and automotive lighting.

The specific data is subject to PDF, and the above content is for reference