1N6489US

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Zener diodes, sometimes called voltage-regulating diodes, are diodes designed to regulate and limit the amount of current passing in either direction of the diode’s semiconductor junction. Specifically, the 1N6489US model of Zener diodes is a single Zener diode that takes a maximum forward current of 500mA and has a breakdown voltage of 16V when reverse biased. It can be connected in parallel with a load to provide a source of voltage for a wide variety of applications.

The mass production and integrated circuit and semiconductor technology that is currently available has allowed for sharp and precise voltages to be obtained from Zener diodes. With the 1N6489US model in particular, 16V is a very precise, common Zener voltage. This type of Zener diode is typically used in electronics, communications, signal processing and amplifier circuits, as well as industrial instruments.

On the surface, the 1N6489US appears identical to a standard diode, except it will have an explicitly labeled breakdown voltage. That is to say, the diode is constructed to allow the current to remain constant when the voltage level is above or below the breakdown voltage. This unique feature is what makes Zener diodes so useful.

As previously mentioned, the 1N6489US is connected in parallel with a load and goes from a reverse biased junction to a forward biased junction. The reverse biased junction allows for minimal current flow until the source voltage passes the “breakdown voltage.” Meanwhile, the forward biased junction allows for current to flow as normal in the other direction. This allows for the load to be regulated and decreases the chances of damage from current or voltage fluctuation.

When the source voltage reaches the diode’s breakdown voltage, the 1N6489US will operate in the “Zener region,” which allows for current to flow without increasing its voltage. As the voltage increases, the current remains constant, and this prevents any potential damage to the voltage regulated circuit in the event of an overvoltage.

The 1N6489US Zener diode can also be used in applications where a regular diode would be employed. In this case, both the forward and reverse biased junctions work in tandem to allow for current flow only in the intended direction. This is useful in circuits where current must only flow in one direction when the circuit is completed.

The 1N6489US is also useful for noise reduction and signal filtering for signals of varying frequencies. This type of diode can be used to filter out certain frequencies or allow only certain frequencies to remain. In addition, these types of Zener diodes are also good for controlling and limiting the “ripple” voltage in the output of a power supply, since they are able to keep the output voltage constant.

In conclusion, the 1N6489US model of Zener diodes is a single diode with a breakdown voltage of 16V, allowing for current to remain constant when the diode is reverse biased. This diode is used for various purposes including voltage regulation, voltage limiting, alleviating overvoltage and current surges, providing a constant voltage output, and noise suppression. As such, the 1N6489US is a highly versatile and necessary component for many different types of electronics.

The specific data is subject to PDF, and the above content is for reference