1N6482HE3/96

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1N6482HE3/96 is a single diode rectifier with a variety of applications. It is thermionic type diode with a maximum blocking voltage of 500 volts, making it ideally suited for medium voltage switching and rectification circuits.

In a bridge rectifier, the 1N6482HE3/96 is usually arranged so that two of the four blades are connected in series. The other two blades are connected in parallel. In this configuration, the 1N6482HE3/96 acts as a half wave rectifier and supplies uni-directional current to the load. In a full wave rectifier circuit, however, the 1N6482HE3/96 rectifies both half-cycles of the waveform and supplies bidirectional current.

The circuit schematic of the 1N6482HE3/96 is quite simple, consisting of just two main components; the main diode and the voltage regulating element. The main diode, made of a low resistance metal or alloy, is the main conductor and transfers the current from the anode to the cathode. The voltage regulating element, made of a heavy metal alloy, acts as a voltage divider, controlling the amount of voltage drop across the diode.

1N6482HE3/96 is most commonly used for DC power applications, such as UPS systems, automotive systems, battery charging and harvesting counter-electromotive force (cemf) for switching circuits. In all these applications, the diode functions as a switch, allowing current to flow in one direction and blocking current flow in the opposite direction. This ensures that the correct polarity of current is maintained and the system remains in a stable state.

The 1N6482HE3/96 is also used as a protection device in high voltage/high current switching circuits. In these circuits, the diode rectifies the high voltage/high current pulse into a lower voltage pulse, dissipating the excess energy in the form of heat. This helps to protect the circuit from short circuit or other damage due to high current or voltage.

The working principle of the 1N6482HE3/96 is quite straightforward. When the anode voltage exceeds the voltage that can be supported by the diode, current flows through it in the forward direction. If the voltage falls below the threshold, current ceases to flow and the diode snaps back to its off position. This action helps to protect the electric circuit from any transient voltages or spikes.

In conclusion, the 1N6482HE3/96 is an effective and reliable diode for DC power applications. It is rugged and can withstand exposure to high voltage and currents. The 1N6482HE3/96 also provides excellent protection for electric circuits from damage due to transient voltages and spikes.

The specific data is subject to PDF, and the above content is for reference