2N4126_S00Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N4126_S00Z is a single bipolar junction transistor (BJT) suited for use in a variety of applications. This particular type of transistor is categorized as a PNP transistor, indicating that it is an NPN-type that can switch up to 80V with a maximum of 100mA. It is commonly used in the consumer electronics sector and has a power dissipation of 500mW.

The PNP transistor works similarly to the NPN but functions in a reverse manner. When a positive voltage is applied (or a negative voltage is removed) between the base and emitter electrodes of the transistor, current flows from the emitter to the collector electrode. This is known as forward current and turns the transistor on, allowing it to conduct electricity. Conversely, applying a negative voltage (or a positive voltage) between the base and emitter electrodes will cause current to flow from the collector to the emitter, known as reverse current. This will turn the transistor off and it will not be able to conduct current.

The 2N4126_S00Z has a wide range of applications. It can be used to build simple on-off type switches, provide voltage regulation in portable consumer electronics, act as a buffer between two circuit boards, or be used in motor controllers. It is also commonly used in audio amplifiers, ripple detectors, timer circuits, power converters, and line drivers. Additionally, it can be used in military applications, such as in communications equipment where high voltage, high current applications are required.

When using the transistor in an application, a few key factors should be kept in mind. It has a maximum power rating of 500mW, which limits the amount of power that can be used in the circuit. Additionally, torque should be applied to the silk-screen printed mounting device to avoid additional stress on the solder joints that would otherwise be caused by tightening the device too much. The last important factor is to ensure that a heat sink is used to dissipate any heat that dissipates from the case of the transistor when it is in use.

In conclusion, the 2N4126_S00Z is a single bipolar junction transistor capable of delivering up to 80V and 100mA, with a maximum power rating of 500mW. It has a wide range of applications, including consumer electronics, motor controllers, audio amplifiers, and communications equipment. When using the transistor in a circuit, it is important to ensure that it is handled properly, as to not damage it. Additionally, a heat sink should be used to prevent damage to the transistor due to heat buildup.

The specific data is subject to PDF, and the above content is for reference