2N5086BU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N5086BU is a bipolar junction transistor (BJT). It belongs to the single type, meaning that it has two junctions and one layer of semiconductor material in its structure. It is mainly used in electronic circuits for small signal amplification.

This NPN transistor offers fast switching and responding time, low voltage rating and low current rating. It is also suitable for use in small signal and low-power circuits, due to its low collector-emitter saturation voltage. Moreover, the 2N5086BU provides low noise figure and fast switching time, locking out of the interference.

A bipolar junction transistor is formed by two P-N junctions connected back to back. The forward situation is produced when a positive potential is applied to the base of the transistor. This will allow electrons to be injected by collector, making a current flow from emitter to collector. In the reverse position, when the base has a negative potential, the injected electrons will be blocked and no current will flow.

In switching applications, the signal drives the transistor between its two positions, either cutting off or conducting. This action allows the signal to be amplified and put out of the output port with higher power than the input signal before.

As mentioned, 2N5086BU mainly serves as an amplifier. It offers fast switching and responding time, which makes it suitable for use in electronic projects. It can also limit the output voltage level, allowing it to be applied as a low-voltage and low-power voltage regulator. The transistor can also be used for waveforms shaping, filtering and signal modulation, such as pulse and music modulator.

As for its operation principle, 2N5086BU is a current-controlled device. In other words, the current flowing through the base determined the current that is flowing through the collector. This control between base and collector currents depends on the transistors\' parameters, such as gain and saturation voltage.

As compared to PNP transistors, NPN transistors are suitable for higher voltages design, as they can higher voltage rating and are more reliable. These transistors are also suitable for high-speed low-power applications and operate with a lower collector-emitter saturation voltage.

In conclusion, the 2N5086BU is a suitable choice for various small signal applications, due to its fast switching and responding time, low voltage rating and low current rating. It also provides low noise figure and fast switching time, making it reliable. Moreover, its operation principle is a current-controlled device in which the current flowing through the base determines the current that is flowing through the collector.

The specific data is subject to PDF, and the above content is for reference