2N5093

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N5093 is an NPN silicon bipolar junction transistor, known as an inexpensive general purpose transistor. It was first released in 1966 and is still in active production today. It is a single transistor that can be used for a variety of purposes, including amplification and switching of electrical signals.

The 2N5093 is a low-power, high-frequency switch designed for applications such as AF amplification filtering and switching. Its low voltage and current levels make it suitable for use with low-level electronic equipment and small devices such as radios, MP3 players, and laptop computers. The 2N5093’s small size and wide bandwidth make it well-suited for use in applications that require high-speed switching and fast data transfer, such as in data communication equipment.

The 2N5093 is a PNP bipolar junction transistor with an NPN equivalent. It has a high current-gain bandwidth product, commonly referred to as  hFE. The hFE is a measure of the amplification of a transistor’s output current relative to its input current. The 2N5093’s hFE can range from 50 to 500, and is usually labeled as “hFE” on the package. A higher hFE rating is generally better.

The 2N5093 has a voltage gain of 40 to 120, and is usually labeled as “Vbe or VCE Saturation Voltage” on the package. This is the maximum voltage, once reached the device will begin to either limit or reduce the voltage applied. This voltage gain enables the transistor to be used for amplification of electrical signals.

The 2N5093 is a three-terminal device. The base terminal is used to control the current flowing between the collector and emitter terminals, which are connected to the power supply. When the base terminal is connected to either a low voltage or low current, the collector current is either limited or reduced. The base current, however, must remain constant and is not affected by the voltage or current applied to the base terminal. This ensures the device functions correctly when operating in such conditions.

In addition to limiting and reducing the collector current, the 2N5093 can also switch an electrical signal by varying the base current. By applying a low base current, the collector current is cut off, thereby switching the current applied to the emitter. This can be done either manually or via an automated switch. When used as an automated switch, the 2N5093 can be used to switch the electrical signal on or off. In addition, the transistor can be used to change the frequency of an electrical signal, as well as to amplify or attenuate the signal.

The 2N5093 is an ideal choice for a variety of applications due to its low voltage and current requirements, small size, and wide bandwidth. Its low power consumption means it can be used for applications where power consumption is limited. Additionally, its affordability and ease of use make it suitable for hobbyists and students alike. The 2N5093’s wide range of applications and versatility make it a reliable and affordable choice for most applications.

The specific data is subject to PDF, and the above content is for reference