2N5087RLRAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N5087RLRAG is one of many available transistors that are categorized as bipolarsingle, which are manufactured with a variety of benefits and features. This transistor is typically used in electronic equipment, such as amplifiers, drivers, and radio frequency applications. In this article, we will cover the application field and working principle of the 2N5087RLRAG.

2N5087RLRAG Application Field

The 2N5087RLRAG is an NPN silicon planar bipolar transistor that provides high gain at the cost of a low frequency response. It is designed to be used in applications such as audio amplifiers, switch mode power supplies, and switching units. The maximum voltage rating is 40 volts and it has a power dissipation of 0.5W.

This transistor\'s application field is typically used in amplifier circuits, including preamplifiers, small-signal audio amplifiers, and power amplifiers. It is most commonly used as the input stage in audio amplifiers and the output stage in switch mode power supplies. It can also be used as a driver in relay circuits and in logic circuits.

2N5087RLRAG Working Principle

The 2N5087RLRAG is an integrated circuit (IC) composed of three transistors that are manufactured on a single chip. This type of circuit is called a three-terminal device because there are three terminals connected to the three transistors within the IC. The three terminals are labeled as the base, collector, and emitter.

The working principle of the 2N5087RLRAG is based on the characteristics of bipolar transistors, which are distinguished by the flow of current through them. Current can flow through the three transistors when the base terminal is positively biased, or given an electrical signal. This causes the current to flow through the collector and emitter terminals, creating a signal current to flow in the opposite direction.

The 2N5087RLRAG transistor is designed to have a high current gain, or hFE, which is a measure of how much the collector current is magnified compared to the base current. This allows the signal current to be amplified and then sent to the output terminal. The signal current is then inverted and amplified again to create the desired output voltage.

The 2N5087RLRAG is also designed for high frequency operations, which is helpful for applications such as switch mode power supplies. This type of transistor is able to switch on and off at high speeds, allowing the power supply to be more efficient and reliable.

Conclusion

The 2N5087RLRAG is a bipolar single transistor that is designed for applications such as amplifiers, drivers, and switch mode power supplies. It is capable of providing high gain, fast switching, and high frequency performance. The working principle of the 2N5087RLRAG involves the use of three transistors that are manufactured together on the same chip. The base, collector, and emitter terminals are then connected to the three transistors to allow for the amplification of the signal current.

The specific data is subject to PDF, and the above content is for reference