2N5088TA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2N5088TA is a silicon planar epitaxial NPN bipolar transistor mainly suitable for general-purpose switching and amplifier applications. It is a very popular discrete device due to its LOW power dissipation, LOW saturation voltage, and LOW noise figure.

The 2N5088TA utilizes a single NPN configuration. It is mainly used as an amplifier where it converts the input signal into an output voltage signal. It can provide gain to the applied signal and can be used to amplify both audio and low frequencies. When a base bias voltage is provided to the transistor, its collector-emitter junction is allowed to pass current. When base voltage is removed, the collector-emitter junction is blocked again.

The transistor works on the principle of Operational amplifier. The 2N5088TA can be used as a single emitter stage, or a double emitter stage. It consists of two PN junctions. The base-emitter junction is termed as Forward bias; whereas the collector-emitter junction is termed as Reverse bias. The junction that has the greater reverse bias voltage is termed as Depletion region which will control the current flow through the transistor.

In terms of application fields, 2N5088TA can be used in many applications. The most common application of this transistor is in the circuit of audio amplifiers and receivers. It is also used in servo motors to reduce the number of drivers in the motor and to reduce system cost. It also finds application in AC power control circuits, power supplies, voltage regulators, oscillators, AND gate, OR gate, NOT gate and other logic gates.

2N5088TA can also be used in High voltage applications for controlling the speed of DC motors. It is also used in rectifier circuits for providing overload protection, in Earth leakage circuits for protecting sensitive equipment from over-current, and in switching applications for controlling the power. It is also used in high gain audio applications. 2N5088TA can also be used in RF amplifiers.

2N5088TA is a popular device that has a low power dissipation, low saturation voltage and a low noise figure. Its high current gain makes it suitable for a wide range of amplifier and switching applications. It utilizes the operational amplifier principle and can be used in the circuits of audio amplifiers and receivers, servo motors, AC power control circuits, power supplies, voltage regulators, oscillators, AND gate, OR gate, NOT gate, and other logic gates. It also finds application in high voltage applications, earth leakage circuits and Rectifier circuits. Overall, 2N5088TA is an important and popular device that is used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference