2SD1060S-JKH-1E

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Transistor Type:	--
Vce Saturation (Max) @ Ib, Ic:	--
Current - Collector Cutoff (Max):	--
DC Current Gain (hFE) (Min) @ Ic, Vce:	--
Frequency - Transition:	--
Operating Temperature:	--
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2SD1060S-JKH-1E Application Field and Working Principle
The 2SD1060S-JKH-1E is a Transistor - Bipolar (BJT) - Single type transistor. It is a semiconductor device which acts as a switch or an amplifier. The 2SD1060S-JKH-1E has both an N-type region and a P-type region which allows it to be able to switch between a low or high voltage. The current required for these operation is called a "bias current" and is created due to the collector-base voltage difference.The 2SD1060S-JKH-1E has a variety of applications. One application is a low noise amplifiers (LNA). LNA amplifies weak signals while reducing noise. Since the 2SD1060S-JKH-1E is a high gain low noise transistor and has a maximum gain of above 65 dB, it is capable and is used in LNAs.The 2SD1060S-JKH-1E is also used as a switch in switching power supplies and even electric motors. The 2SD1060S-JKH-1E can switch signals up to the tens of kHz occasions. It can provide a fast response time and is used in electric equipment like remote control unites and various industrial equipment.The working principle of the 2SD1060S-JKH-1E is based on the “common-emitter” configuration. This configuration involves three electrodes (collector, base, and emitter) and the most common for BJT transistors. When the base of the transistor is at 0V and no current is flowing through the base, the voltage in the base-emitter junction is also 0V, so no current can flow through the emitter. But when the base voltage reaches the 0.7V, the voltage present in the base-emitter junction causes the voltage to drop and the current flow through the emitter increases, which allows the electrons to pass through and reach the collector. The amount of current in the collector is proportional to the current in the base, and therefore the current gain (hFε) of the transistor is decided.In conclusion the 2SD1060S-JKH-1E is a Transistor - Bipolar (BJT) - Single typethat is primarily used in low noise amplifiers as an amplifier but is also used as a switch in various industrial equipments and electric motors. With a high gain and low noise, the 2SD1060S-JKH-1E is an excellent choice for a variety of applications. Moreover, the working principle of the 2SD1060S-JKH-1E is based on the “common-emitter” configuration. As a result the current gain (hFε) of the transistor and thereby its operation, is determined by the current flowing through the base.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description